User`s manual

FUNCTION SETUP > GROUP SETUP
OSD -
> >
Press Near/Enter Key
Press Far Key
[ : MOVE CURSOR ]
[ : CHANGE VAL.]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN 1 00: 0 3 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN 1 00: 0 3 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[NEAR:EDIT ACT]
[FAR :EDIT END]
EDIT GROUP 1
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
PATTERN 1 00: 0 3 1
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
8
6
7
8
EDIT GROUP - Selects Function Sequence
After finishing setting up an ‘ACTION’, press near or enter key
to one-upper-level menu. Move cursor up/down to select
‘ACTION NO.’ and repeat to step 4 ~ step 6 to edit the selected
group.
EDIT GROUP - Saves the Setting
After finishing setting up all actions, press far key to exit.
Then cursor should be moved to ‘SAVE’. Press near or enter
key to save the data.
64
7
Note: to properly setup a group for the camera, be sure to have at least 2 Presets,
1 Scan, and 1 Patter setup.
31