Product specifications

• Supports RS232/RS485/TCP/IP
• Cards holder capacity: 100,000
• Transactions storage: up to 270,000
• Supports output activation using PIN from
Keypad Readers
• 4 Built-in Inputs & 4 Built-in Outputs
• Up to 365 holidays
• 15 Time Zones for each door
• 24 sets of Flow Control
• Local and Global Anti-Pass back
• Programmable Door Status
• 32 KB ROM / 512B SRAM
• Multiple types of Events
• Data can be kept for 180 days without power
Access Controller – 2 Door 2 Reader
WAC-2D2T-ENC
• Cards holder capacity: 100,000
• Transactions storage: up to 270,000
• Supports output activation using PIN from
Keypad Readers
• Up to 365 holidays
• 24 sets of Flow Control
• Local and Global Anti-Pass back
• Programmable Door Status
• 32 KB ROM / 512B SRAM
• Multiple types of Events
• 127 controllers for each RS485
• Model WAC-4D4ENC:
2 Built-in Inputs & 6 Built-in Outputs
• Model WAC-4D8ENC:
4 Built-in Inputs & 8 Built-in Outputs
Access Controller – 4 Door / 4 & 8 Reader
WAC-4D4T-ENC / WAC-4D8T-ENC
• Cards holder capacity: 100,000
• Transactions storage: up to 270,000
• Supports output activation using PIN from
Keypad Readers
• Up to 365 holidays
• 24 sets of Flow Control
• Local and Global Anti-Pass back
• Programmable Door Status
• 32 KB ROM / 512B SRAM
• Multiple types of Events
• 6 Built-in Outputs
• 127 controllers for each RS485
• Up to 1,200 m for each RS485
Access Controller – 8 Door 8 Reader
WAC-8D8T-ENC
www.watchnetinc.com WatchNET Providing Security Solutions Since 2000
[e-mail] WatchNET Providing Security Solutions Since 2000
38 39
ACCESS
AC CESS
Watch
Watch
NET
NET
Access Controllers
ACCESS
AC CESS
Watch
Watch
NET
NET
Enterprise class management software
WAS SOFTWARE SERIES - WatchNET ACCESS INTEGRATED SECURITY SYSTEMS SOFTWARE
The system set up is made relatively very easy with WatchNET software. The software scans the
network for all installed controllers and lists them using the Search function. Auto or Manual
configuration is possible on all the controllers detected online.
The operator has the choice to determine whether an Auto download or Manual download to the
controllers is needed from the selectable feature of the software.
WatchNET Access panels can be connected either through a COM port or through an IP address.
In case the controller is connected directly through the RS232 controller's output to the RS232 port
of the server then search could be done on the com port. In addition to this the software also scans
the additional controllers connected to the TCP/IP controllers on its RS 485 bus. However the con-
troller dip switches need to be correctly set before the scan.
Interactive Maps provides you with an as built view of the installed system with all the
detectors located in the appropriate locations on the map, right on your screen.
The programmer can design a map using a picture of the facility or a floor plan of the facility
as the background. The components of the system that needs to be displayed can be chosen
from the list and can be located in the appropriate locations on the map.
The pop up function ensures that in the event of an alarm the appropriate map pops up.
The alarm can be acknowledged using the acknowledge button on the top and action taken
can be recorded. The system also provides real time status display and control of
all the devices on the map.
The system enables the operator to monitor entry of personnel on site in real time.
The person's database picture along with his credentials is displayed. The latest entry is
shown as a large picture while the previous three is delegated to smaller screens on the
side.
This feature facilitates video verification through camera pictures as well. The system
also enables specific events to pop up boxes from different areas of the screen. With
this the operator is easily available to identify whether the entry is a regular entry which
pops up from the right hand side bottom of the screen or an alert which can pop up
from the left hand side top corner of the screen.
These features reduce stress on the operator as they don't have to stay focussed on
the screen all the time monitoring the events. The colour of events as it appears on the
screen can also be configured making it specific to different organizations.
Software Features:
Software in multiple languages
Choice of colors & sounds for every event
Auto or Manual Backup of the Database
Searching / Add / Delete quickly
DVR / IP Camera Video Integration
Pop up screens on specific events
Easy Icon based navigation
Auto Detection of Controllers on the network
Exporting Events
Interactive dynamic maps
Event Email Notification
TCP/IP
TCP/IP
TCP/IP
Controller/Aux Power Included
with battery charger
Controller/Aux Power Included
with battery charger
Controller/Aux Power Included
with battery charger
Mobile Phone & Web Server Control
iPhone
Android
Mobile Phone & Web Server Control
COMING SOON