User manual

1110
INSTALLATION
*
A. Loosen the Fixing Screw (D), using a screw
driver.
B. Separate the Upper Case (A) and the Base (E).
C. Detach the Gimbal (C) from the Base (E).
D. Cut a hole in the ceiling for routing the cables.
E. Place the Base (E) horizontally against the
ceiling and drill the screw holes at the two
marked positions.
F. Pass the Power Cable (F) and Video Cable (G)
from the camera unit through the cable hole in
the ceiling.
G. Align the screw holes of the camera unit with
the holes in the ceiling. Secure
the camera to the ceiling with the two screws.
H. Fix Gimbal (C) to the Base (E).
I. Install and adjust the camera unit.
J. Adjust the dome liner to show the lens through
the camera window, and then x it to the Base (E).
11. Attach the Upper Case (A) with the Base (E) and
tighten Loosen the Fixing Screw (D).
F
G
E
C
B
A
D
CONNECTION
*
DC12V
CAUTION : Chec k for polarit polarit y when using a DC12V power power suppl y.
300.0
DC12V / AC24V