V1362DIR / V1363TIR / V1382TIR / V1382TIRH / V1365T Vandal Dome Camera User Manual 5436 W Crenshaw St. Tampa, FL 33634 Tel: 866-446-3595 / 813-888-9555 Fax: 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.tv Technical Support Hours: Monday-Friday 8:30am to 8:00pm Eastern Time ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS TROUBSHOOTING Do not open or modify. ■ Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. ■ Do not put objects into the unit. ■ Keep metal objects and flammable substances from entering the camera. It can cause fire, short- circuits, or other damages. ■ Be careful when handling the unit. ■ To prevent damages, do not drop the camera or subject it to shock or vibration. ■ Do not install near electric or magnetic fields.
FEATURES*-V1362DIR FEATURES*-V1363TIR ■ 1/3" Sony Super HAD II CCD ■ 1/3” High Resolution CCD ■ 540 TV Lines ■ High Resolution 560 TV Lines ■ 3.3 ~ 12mm Varifocal Auto Iris Lens ■ 3.
FEATURES*-V1382TIR FEATURES*-V1382TIRH ■ 1/3” Sony Super HAD Ⅱ CCD ■ 1/3” Sony Super HAD Ⅱ CCD ■ High Resolution 560 TV Lines ■ High Resolution 560 TV Lines ■ OMNI-Focus 2.9~8.5mm 3X Motorized Zoom, Auto Iris 70ft Range IR with Intelligent Camera Sync ■ OMNI-Focus 2.9~8.
FEATURES*-V1365T ■ 1/3" Pixim Seawolf CMOS Sensor ■ 690 Horizontal TV Lines ■ 3.
INSTALLATION* A. Loosen the Fixing Screw (D), using a screw driver. B. Separate the Upper Case (A) and the Base (E). C. Detach the Gimbal (C) from the Base (E). D. Cut a hole in the ceiling for routing the cables. F G DC12V E C DC12V / AC24V E. Place the Base (E) horizontally against the ceiling and drill the screw holes at the two marked positions. F. Pass the Power Cable (F) and Video Cable (G) from the camera unit through the cable hole in the ceiling. CONNECTION* B G.
CAMERA SETTING* ■ LENS ADJUSTMENT CAMERA SETTING FOR SIDE OSD CONTROL BOARD* : V1362DIR, V1363TIR, V1382TIR, V1382TIRH, V1365T FUNCTIONAL OF CONTROL BOARD 1. Focus Lever [1] SW Functional control of O.S.D(On Screen Display) 2. Zoom Lever [2] CON1 Second Video output connector SW [3] CON2 RS-485 connector RIGHT UP DOWN CON1 LEFT CON2 1. Set the zoom level to the desired position by moving the Zoom Lever. 2. Set the focus, using the Focus Lever.
REMOTE CONTROL*-V1382TIR, V1382TIRH ■REMOTE CONTROL Instructions Menu Access and Control 1. Set the Camera iD in the OSD menu. The default setting is 001. NOTE : If the Camera ID is modified, you must reset the power for the new settings to apply. Once you reset the power, the camera will recognize the new Camera ID. 2. If you press the KEY Button, the camera display will turn into the standby image. NOTE : The LED flicker for approximately 20 seconds. 3.
OSD MENU*-V1362DIR EXPOSURE FUNCTION BRIGHTNESS MANUAL (ELC LEVEL : 0 ~ 100) / DC (DC LEVEL : 0 ~ 31) MIRROR OFF/ MIRROR SHUTTER 1/60, 1/100FLC, 1/120 ~ 1/100000 OFF / ON BLC (Back Light Compensation) OFF / 12dB ~ 36dB AGC (Auto Gain Control) EXIT / SAVE&EXIT / FACTORY SET SHARPNESS 0 ~ 49 GAMMA USER / 0.45 / 0.6 / 1.
MODUEL OSD MENU*-V1363TIR EXPOSURE PRIVACY MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON COLOR SET BLACK / GRAY / COLOR 1~ 6 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET COLOR BRIGHTNESS AE PREFERENCE BLC / HME AGC STARLIGHT NIGHT-UP DAY&NIGHT WB MODE R-Y GAIN B-Y GAIN D&N MODE C_SUP A_SUP SYNC SYNC MODE INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET FUNCTION SETUP CAMERA ID 0 ~ 255 TITLE EDIT TITLE RESET TITLE POS.
OSD MENU*-V1363TIR EXPOSURE BRIGHTNESS SHUTTER BLC/HME AGC STARLIGHT NIGHT-UP EXIT JUMP 0 ~ 100 1/60 / FLK / 1/250 ~ 10000 / SENS-UP x2 ~ x256 OFF / BLC / HME HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) AUTO(x2 ~ x256) / OFF NORMAL / HIGH EXIT / SAVE&EXIT / FACTORY SET COLOR WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / AWT / PUSH LOCK / MANUAL / INDOOR / OUTDOOR 0 ~ 100 0 ~ 100 EXIT / SAVE&EXIT / FACTORY SET DAY & NIGHT Day & Night Mode C-SUP A-SUP EXIT JUMP 20 AUTO : READ TIME(3~63) / S-LEVEL(0~1
MODUEL OSD MENU*-V1382TIR, V1382TIRH EXPOSURE SYNC SYNC EXIT JUMP INTERNAL / AUTO EXIT / SAVE & EXIT / FACTORY SET SETUP TITLE EDIT OFF / ON PC CONTROL (RS485 Control) CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400 / 4800 / 9600) The protocol is PELCO-D. LANGUAGE ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL MONITOR CRT / LCD Select LCD only if the camera is directly connected to the LCD monitor.
OSD MENU*-V1382TIR, V1382TIRH EXPOSURE BRIGHTNESS SHUTTER BLC AGC MAX_DR STARLIGHT EXIT JUMP 0 ~ 99 1/60, 1/100FLC, 1/120~1/100000 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) OFF / ON (0~20) (Electronic Wide Dynamic Range) AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT / SAVE&EXIT / FACTORY SET COLOR WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / ATW / MANUAL / PUSHLOCK (AWC is recommended.
PRIVACY MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MODULE OSD MENU*-V1365T EXPOSURE MASK 5 OFF / ON MASK 6 OFF / ON EXIT JUMP SYNC SYNC V-PHASE EXIT JUMP SETUP CAMERA ID TITLE EDIT DPC MONITOR LANGUAGE BAUDRATE OMNI LENS EXIT JUMP EXIT EXIT SAVE&EXIT FACTORY SET 26 COLOR BRIGHTNESS AE PREFERENCE WDR BLC AGC STARLIGHT METER ZONE MASK 4 OFF / ON EXIT / SAVE&EXIT / FACTORY SET INTERNAL / AUTO DAY&NIGHT WB MODE COLOR GAIN D&N MODE 0 ~ 199 EXIT / SAVE&EXIT / FACTORY SET FUNCTION 0 ~ 254 OFF / ON
OSD MENU*-V1365T EXPOSURE BRIGHTNESS -48 ~ 60 AE PREFERENCE OUTDOOR / INDOOR BLC OFF / BLC (PERCENTILE 10 ~ 50) WDR LOW / NORMAL / MEDIUM / HIGH / CUSTOM AGC LOW / MEDIUM / HIGH / CUSTOM STARLIGHT x2 ~ x64 / OFF METER ZONE ADJUST ZONE 1 / ADJUST ZONE 2 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET FUNCTION MIRROR OFF / MIRROR / V-FLIP / ROTATE SHARPNESS -8 ~ 8 GAMMA 25(0.25) ~ 100(1.0) 3D DNR MOVIE / INFO D-ZOOM EXIT JUMP ZOOM:1(x1.
SYNC SYNC INT1(SYNC to 59.64Hz)/INT2(SYNC to 60.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens Resolution Video Output S/N Ratio OSD Environmental Conditions Power Physical Specification IP Rating 34 SPECIFICATIONS* V1382TIR Color/BW Mount Device Size Pixels-Total Pixels-Effective System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode IR-LED On EWDR STAR-LIGHT 3D-DNR DIS Motion Detection Privacy Zone Focal Length Horizontal VBS 1.
WARRANTY INFORMATION* LIMITS AND EXCLUSIONS* Digital Watchdog (referred to as “the Warrantor”) warrants the Camera Series against defects in materials or workmanship as follows. There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages, including without limitation and damage to recording media, resulting from the use of these products or arising out of any breach of the warranty.
