User manual

INSTALLATION

the Fixing Screws (D).

2. Separate the Upper Case (A) and the Base (E).

3. Detach the Gimbal (C) from the Base (E).

4. Cut a hole in the ceiling for routing the cables.

5. Place the Base (E) horizontally against the ceiling and

drill the screw holes at the two marked positions.

6. Pass the Power Cable (F) and Video Cable (G) from the

camera unit through the cable hole in the ceiling.

7. Align the screw holes of the camera unit with the

holes in the ceiling. Secure the camera to the ceiling

with the two screws.

8. Fix Gimbal (C) to the Base (E).

9. Install and adjust the camera unit.

10. Adjust the dome liner to show the lens through the

11. Attach the Upper Case (A) with the Base (E) and tighten

Loosen the Fixing Screw (D), using a screw driver.

camera window

, and then x it to the Base (E).