User manual

19
EXPOSURE
BRIGHTNESS 0 ~ 99
SHUTTER 1/60, 1/100FLC, 1/120~1/100000
BLC
OFF / ON
BLC (Back Light Compensation)
AGC
HIGH / MIDDLE / LOW / OFF
AGC (Auto Gain Control)
MAX_DR OFF / ON (0~20) (Electronic Wide Dynamic Range)
STARLIGHT AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.)
EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET
COLOR
WB MODE AWC / ATW / MANUAL / PUSHLOCK (AWC is recommended.)
R-Y GAIN 0 ~ 255
B-Y GAIN 0 ~ 255
EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET
DAY & NIGHT
Day & Night Mode
AUTO / COLOR / BW / EX-CONT
COLOR --> BW: Switching from COLOR to BW; If the number is higher, the camera will only
switch during a super low light condition.
BW --> COLOR: Switching from BW to COLOR; This number should be always lower than
COLOR --> BW.
Read Time: Time interval to switch from COLOR to BW.
COLOR
BW: BURST (OFF/ON); When the BURST is OFF, the picture will have less noise.
C-SUP
Color Suppression: Color will be reduced at low illumination, if the C_SUP Level is higher /
0 ~ 100. (Not available when 3D-DNR is ON.)
A-SUP
Aperture Suppression: Edge sharpness will be reduced at low illumination, if A_SUP Level
is higher / 0 ~ 100. (Not available when 3D-DNR is ON.)
EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET
OSD MENU
*
(V1382TIR)