User manual

1. Mounting Template

2. User Manual

3. Security L-Key

4. Single Sided Hex Key

5. Double Sided Hex Key

6. Secondary BNC Cable for Field

Monitor

7. Four (4) Screws and Four (4) Dry

Wall Anchors

8. 3 Axis Gimbal Guide

Camera Installation

Use the mounting template to mount the camera.

Using the security L-key to loosen the four screws that secure the vandal proof dome cover,

Remove the vandal proof dome cover to access the screw holes to mount the camera.

NOTE: Keep the lens and the vandal proof cover free from dust or ngerprint.

INSTALLATION

A. Use the supplied L Wrench to remove the four xing

screws from the dome cover.

B. Align the camera unit with the surface of the ceiling.

Draw marks on the ceiling in the places where the

screw holes will be drilled. Drill the four holes.

C. Cut a small hole in the ceiling for the cables.

D. Pass the power cable and video cable from the camera

unit through the cable hole in the ceiling.

E. Align the four screw holes in the camera unit with the

screw holes on the ceiling, and then secure the camera

in place by tightening the four screws through the

washers.

F. Carry out the settings and adjustments for the camera.

G. Secure the dome cover by tightening the screws.

3 4 5 6

1110