V3363D, V3363D922 V3363DH V3367WD, V3367WTIR Vandal Dome Camera User Manual 5436 W Crenshaw St. Tampa, FL 33634 Tel: 866-446-3595 / 813-888-9555 Fax: 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.tv Technical Support Hours: Monday-Friday 8:30am to 8:00pm Eastern Time ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS TROUBSHOOTING Do not open or modify. ■ Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. ■ Do not put objects into the unit. ■ Keep metal objects and flammable substances from entering the camera. It can cause fire, short- circuits, or other damages. ■ Be careful when handling the unit. ■ To prevent damages, do not drop the camera or subject it to shock or vibration. ■ Do not install near electric or magnetic fields.
FEATURES*- V3363D FEATURES*- V3363D922 ■ 1/3" High Resolution CCD ■ 1/3" High Resolution CCD ■ High Resolution 560 TV Lines ■ High Resolution 560 TV Lines ■ 3.
FEATURES*- V3363DH FEATURES*- V3367WD ■ 1/3" High Resolution CCD ■ 1/3” Sony Super HAD II CCD ■ High Resolution 560 TV Lines ■ High Resolution 560 TV Lines ■ 3.3~12mm Varifocal Auto Iris Lens ■ 3.
FEATURES*- V3367WTIR ■ 1/3” Sony Super HAD II CCD ■ High Resolution 560 TV Lines ■ 3.3~12mm Varifocal Auto Iris Lens ■ 100ft Range IR with Intelligent Camera Sync ■ True Day & Night / TDN5 (Electro Magnetic Mechanism) ■ Star-Light (Super Low Light Technology) ■ ■ ■ DIMENSIONS IN MILLIMETERS* 102.0 61.8 Max-DR (Electronic Wide Dynamic Range) Enables the camera to capture perfect images in both bright and dark environments simultaneously.
INSTALLATION* INSTALLATION* 1. Mounting Template 3 1 4 5 6 7 2. User Manual 3. Security L-Key 5. Double Sided Hex Key B. Align the camera unit with the surface of the ceiling. Draw marks on the ceiling in the places where the screw holes will be drilled. Drill the four holes. 6. Secondary BNC Cable for Field C. Cut a small hole in the ceiling for the cables. 4. Single Sided Hex Key Monitor 7. Four (4) Screws and Four (4) Dry Wall Anchors 8. 3 Axis Gimbal Guide 2 A.
CONNECTION* CMAERA SETTINGS* ■ 12VDC/24VAC VIDEO OUT LENS ADJUSTMENT a. Focus lever b. Zoom Lever 300.0 CAUTION : Check for polarity when using a DC12V power supply. 12 1. Set the zoom level as desired positiong by moving Zoom lever. 2. Set the Focus level as the image is focussed by moving Focus lever.
CAMERA SETTING FOR SIDE OSD CONTROL BOARD* MODULE OSD MENU*-V3363D, V3363D922, V3363DH EXPOSURE 2nd Video Joystick Key The functions of joystick are camera zoom in/out and OSD control. COLOR BRIGHTNESS AE PREFERENCE BLC / HME AGC STARLIGHT NIGHT-UP FUNCTION MOTION MIRROR SHARPNESS FREEZE D-ZOOM 3D DNR DRC 2nd Video Video Test output connector.
OSD MENU*-V3363D, V3363D922, V3363DH EXPOSURE BRIGHTNESS SHUTTER BLC/HME AGC STARLIGHT NIGHT-UP EXIT JUMP FUNCTION 0 ~ 100 1/60 / FLK / 1/250 ~ 10000 / STARLIGHT x2 ~ x256 OFF / BLC / HME HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) AUTO(x2 ~ x256) / OFF NORMAL / HIGH EXIT / SAVE&EXIT / FACTORY SET COLOR WB MODE R-Y GAIN B-Y GAIN EXIT AWC / AWT / PUSH LOCK / MANUAL / INDOOR / OUTDOOR 0 ~ 100 0 ~ 100 JUMP MIRROR OFF/MIRROR/V-FLIP/ROTATE SHARPNESS 0 ~ 31 FREEZE OFF / ON NEG.
SYNC SYNC EXIT INTERNAL / AUTO JUMP SETUP TITLE EDIT OFF / ON PC CONTROL (RS485 Control) CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400/4800/9600/19200/38400/57600) The protocol is fixed pelco-D. LANGUAGE ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL MONITOR CRT / LCD / USER Select LCD only if the camera is directly connected to the LCD monitor.
OSD MENU*-V3367WD, V3367WTIR EXPOSURE BRIGHTNESS E.SHUTTER BLC AGC MAX_DR STARLIGHT EXIT JUMP 0 ~ 99 1/60, 1/100FLC, 1/120~1/100000 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) OFF / ON (0~20) (Electronic Wide Dynamic Range) AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT / SAVE & EXIT / FACTORY SET OFF/MIRROR/V-FLIP/ROTATE SHARPNESS 0 ~ 49 GAMMA 0.45 ~ 1.00 / USER FREEZE OFF / ON NEGA.
PRIVACY MASK 1 MASK 2 MASK 3 MASK 4 MASK 5 MASK 6 EXIT JUMP OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON OFF / ON EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC MODE V-PHASE EXIT JUMP INTER / AUTO 0 ~ 199 EXIT / SAVE & EXIT / FACTORY SET SETUP CAMERA ID TITLE DPC 0 ~ 254 (RS485 ID) OFF / ON OFF / AUTO DPC (Dead Pixels Cancellation) MONITOR CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.
LIMITS AND EXCLUSIONS* There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including, without limitation, damage to recording media) resulting from the use of these products, or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
SPECIFICATIONS*-V3363D922 Camera TYPE SPECIFICATIONS*-V3363DH V3363D922 Color/BW Camera TYPE V3363DH Color/BW Video Output VBS 1.0Vp-p VBS 1.0Vp-p(75 Load) S/N Ratio S/N Ratio 52dB OSD OSD YES Environmental Conditions Operating Temperature -10oC ~ 55oC (14oF ~ 131oF) Humidity Less than 90% Power Requirement 12VDC / 24VAC Power Consumption 1.96 [W] / 2.2 [W] Dimensions 109.6 X 140.1mm Weight 1.
SPECIFICATIONS*-V3367WD Camera TYPE Mount Image Scanning Min.
MEMO MEMO
