System information

Interface Features
Any given interface currently has three features that my be activated (see fig 11).
fig 11: interface features
If the System -> Service -> PPPOE Server setup is used and you want to allow PPPOE connections on
this interface, then this should be turned on. When the status of a particular interface is changed from
off to on or vice versa, the PPPOE server must be restarted.
The dhcp auto-auth should be activated when users authenticate via RADIUS (such as when the system
is used as a hotspot) and get their IP address via DHCP. This allows the RADIUS server to manage IP
address assignments following authentication. If you use the regular DHCP server found in the System-
>Services menu, users may not be able to login the second time.
The enable dhcp client option allows you to turn on the dhcp client for this interface.
DHCP auto-auth configuration
The dhcp auto-auth configuration will allow you to configure automatic authentication and address
assignment. Selecting auth-auth configuration (see fig 12) will bring up a configuration box (see fig
13).