Product guide
www.SecurityInfoWatch.com Cygnus Security Media | BIG BOOK Spring 2014 BB21BB20 BIG BOOK Spring 2014 | Cygnus Security Media www.SecurityInfoWatch.com
ALARMS & INTRUSION DETECTION
Optex iSeries SL-350QFRi
Photoelectric Detector
Optex expands on its
industry leading out-
door, battery-powered
iSeries intrusion line
with the SL-350QFRi, a
350-ft., battery-powered
photoelectric detector
requiring no trenching or
wiring.
The iSeries SL-
350QFRi includes an
Inovonics wireless
EN1941 transmitter pre-
installed and comes with
four batteries per set,
with the option of expanding to eight
for up to 10 years of battery life.
With wireless transmitters installed
and batteries included, a quicker
set-up time is achieved and less time
is spent on the job site. Because no
trenching or wiring is required, less
labor is involved and end-users will
experience less down time to busi-
ness operations.
The SL-350QFRi is compatible with
the OPTEX AX-TW200 line of beam
towers for a clean, concealed, wire-
less mounting option, and its flexibil-
ity and durability make it well-suited
for substations, oil and gas facilities,
transportation, correctional facilities,
storage and impound yards, critical
infrastructures, industrial complexes
and solar fields.
Request more information:
www.SecurityInfoWatch.com/10753882
AX-TW200 Photoelectric Beam
Tower from Optex
The AX-TW200 is a
double sided, freestand-
ing photoelectric beam
tower housing OPTEX
wireless or hardwired
photoelectric beams.
When a site plan is
provided, we’ll custom-
build our towers and pre-
install our photoelectric
beams in them based
on the job site specifi-
cations, all at no extra
charge. We’ll even ship
them directly to the job
site, labeled for position
and ready to be installed.
In addition to being aesthetically
pleasing, the AX-TW200 allows
OPTEX beams to be double stacked
for added security, conceals the
beam height and protects them
against environmental elements and
vandalism.
The flexibility and durability of
the AX-TW200 photoelectric beam
tower housing make it well-suited
for substations, oil and gas facilities,
transportation, correctional facilities,
storage and impound yards, critical
infrastructures, industrial complexes,
solar fields and anywhere OPTEX
photoelectric detectors are required.
Request more information:
www.SecurityInfoWatch.com/11239026
NAPCO Commerical Addressable Fire
or Gemini Combo Burg/Fire Systems
Napco Security Technologies
Inc.’s Commercial Platform is a
full line of Commercial Fire or
Combo Intrusion/ Fire Systems
configurable for wireless, hardwire,
analog, addressable or conven-
tional technology devices.
Now offering speedier setup
and installation with new Quick-
Start faster programming, the
UL commercial grade wireless fire
& Burglary devices are installed in a
fraction of the time. There is a new
fire-only program menu and standard
fire alarm system preset template you
can build on. All you will need to do is
enter the quantity and type of devices
— they will be auto-inserted, map-
ping inputs to outputs that are clearly
color-coded.
Auto-Learn discovers and identi-
fies addressable devices on loops. It
will preload descriptions, e.g.,“smoke
detector” — and list the quantity of
modules, sensors and relays for each.
Fast Track Diagnostics automatically
distinguish minor warnings from
critical errors. Enhanced battery and
voltage calculators are also included.
The NAPCO Commercial Platform
includes built-in labor savings, incred-
ible power, and feature-rich value
that’s easy to plan-out and standardize
on for 255, 128 or 32 points of com-
mercial wireless, analog addressable
and/or 12V conventional installations;
and it is fully compliant with the most
rigorous industry standards, including
UL864 9th Ed., NFPA72, SIA CP01
and more.
Features include easy AHJ calcs; up
to 32AH standby separate for burglar
and fire; and remote/onsite upload-
able smoke sensitivity reporting.
Request more information:
www.SecurityInfoWatch.com/10524477
PA-6800 Series Ceiling Mount
PIR Sensors from Takex
The PA-6800 series of ceiling mount
PIR sensors from TAKEX combine a
discreet compact appearance with
outstanding performance at a low
price. The sensor can be snapped in
and out of the detachable base unit
for easy installation in high places.
Models include the PA-6805E
Spot detector, PA-6810E 360 degree
detector (pictured), PA-6812E Wide
Angle detector, and the PA-6820E
Vertical Curtain detector. Each utilizes
a separate head and base design,
making installation easier. A series
of dip switches allows easy control
of Pulse Count, Sensitivity, Alarm
Memory, LED On/Off & Selectable
Silent N.O. or N.C. Alarm Output
Relay. Input voltage is 9VDC to
18VDC and is non-polarity specific.
The sealed sensor heads provides
a dust and insect free PIR sensing
chamber.
The overall small profile makes the
PA-6800 series sensors ideal for both
residential and commercial installa-
tions. Takex America Inc. offers a five
(5)-year warranty for all its security
sensors.
Request more information:
www.SecurityInfoWatch.com/11416062
www.takex.com
PB-IN-HF Series Intelligent Quad
Photoelectric Beams from Takex
The TAKEX PB-IN-HF
series Intelligent Quad
Photoelectric Beams
are industry-leading
performers available
in ranges from 165
feet/50 meters, 330
feet/100 meters & 660
feet/200 meters.
Each features high
performance, double-
modulated infrared
light sources and a
resonance filter to remove unwanted
background noise.
TAKEX Beams feature: 50,000 Lux
of external light immunity; Phase
Locked Loop monitors performance
in changing environmental condi-
tions; Auto-Gain Lock allows high tol-
erance of signal degradation before
issuing an alarm; Auto-Gain Control
allows the photo beam receiver to
increase its sensitivity up to 300% to
maintain protection integrity; Envi-
ronmental Alarm Output can signal
when 80% of infrared signal is lost
providing pre-warning due to fog or
other environmen-
tal disturbances;
4-channel frequency
selection allows the
stacking of beams
as well as the instal-
lation of beams
within close proxim-
ity of one another
without crosstalk
interference.
Each set of PB-
IN-HF photo beams
include pole mounting hardware and
stainless steel back plate for wall or
post mounting. They can also be
mounted within the TAKEX TAD series
of photo beam towers for discrete
installations. Input power is 10VDC to
30VDC and is non-polarity specific.
Alarm Output can be N.O. or N.C.;
the Environmental Output is N.O. or
N.C.; and the Tamper output is N.C.
TAKEX America offers a five-year
warranty on these sensors.
Request more information:
www.SecurityInfoWatch.com/11416057
www.takex.com
www.napcosecurity.com
www.optexamerica.com/security-products/ax-tw200
www.optexamerica.com/security-products/sl-350qfri
CBB-ALL-SCH-SP14
Main Florida Warehouse: Pinellas Park, FL • 800-282-2837
South Florida: Pompano Bch, FL • 888-780-6071
Atlanta: Doraville, GA • 877-217-9396
Charlotte: Charlotte, NC • 888-571-9145
CO-220
Including remote
lockdown fob
Looking for a great
price on a stand alone
pushbutton lock?
Let our Electronic Access
Department
design a wireless or
online access system.
Your CO/AD
Headquarters
Gabe Esteva
Electronics Department Supervisor
New
Let 850
Combined
Years of
Industry
Experience
on Staff
Work for You
Mention Promo Code: BIGBOOK14
NOW
ONLY
$
275.
00
CO-100
All popular AD congurations
will ship same day!
Request information: www.SecurityInfoWatch.com/10215166
Honeywell’s Custom Alpha and
Fixed-Language Keypads
Honeywell’s 6100 Series Custom Alpha and
Fixed-Language Keypads give security deal-
ers a broader portfolio to accommodate a
range of homeowner budgets and lifestyles.
The keypads feature VISTA Intelligent Pro-
gramming (VIP) — an intuitive, menu-based
programming option for the most common
functions that helps reduce installation time
and labor costs that is currently available
with Honeywell’s VISTA-20P control panels. Easy-to-use graphics and a symmetri-
cal design give the keypads the same look and feel as Honeywell’s home and
business controllers with touchscreen displays. Seven models offers large screens
with light, neutral backlighting. The devices occupy less wall space while providing
32-percent larger display areas with bold fonts and graphic icons, which are ideal
for the elderly or visually impaired.
www.security.honeywell.com
Request more information: www.SecurityInfoWatch.com/11230654
OmniTouch 7 Touchscreen
from Leviton
The OmniTouch 7 is a capacitive touch, glass front touch-
screen from Leviton that features a seven-inch-high resolu-
tion screen for controlling security, energy and entertainment
settings in a residential setting. Featuring large, recognizable icons, the touchscreen
enables users to arm or disarm their Leviton security system, alert emergency person-
nel, lock or unlock doors and view crisp IP or analog surveillance video footage. The
device features slider bars that adjust individual light levels from zero to 100 percent;
control up to 64 thermostats to manage humidity settings and additional systems like
irrigation, ventilation; and monitor or adjust window coverings.
www.leviton.com
Request more information: www.SecurityInfoWatch.com/11174182
Two-Way Wireless
TouchScreen from DSC
The WTK5504 Two-Way Wireless TouchScreen Arming
Station from DSC, part of the Security Products busi-
ness unit of Tyco, easily fits into contemporary décor.
The stylish keypad, which provides a futuristic take on
the look of a traditional offering, provides an enhanced user experience, with intui-
tive menu-driven touchscreens that allow full control of the system. The unit features
voice prompts and voice chime that provide verbally enunciated system status
updates. It also offers a 4.3-inch full-color display with quick-view LED status, pro-
grammable user functions, a night light and 24-hour battery back up.
www.dsc.com
Request more information: www.SecurityInfoWatch.com/10916748
WDE EasyKits from Detex
The WDE EasyKits from Detex provide a secure
two-point locking system with 15-second delay
and 100dB alarm when someone attempts to exit.
The WDE EasyKit is designed for outdoor appli-
cations and is perfect for garden center gates,
amusement parks, sports arenas and any location
exposed to weather or moisture where delayed
exit is required. Although ideal for retail in helping
to prevent theft, in applications such as outdoor
childcare and assisted living homes, WDE EasyKit
can also be used to help protect those trying to
exit. Use a standard WDE EasyKit such as WDEx-
10EXx1S-1 or call to create your custom EasyKit, all EasyKits include best in class
components and easy to follow wiring and riser illustrations.
www.detex.com
Request more information: www.SecurityInfoWatch.com/10217290