User Manual

OSD Menu_Privacy (cont.)

You can hide some parts of the camera’s view to protect yout privacy and sensitive data. A total

of 24 privacy masking zones are available, including 16 square zones and 8 polygon-shaped

zones.

Polygon

- Zone num: Select the zone number between 0~7.

- Zone disp: Select to show or hide the selected zone.

- PO

S0-X: Move the zone’s upper left angle left and right.

- POS0-Y: Move the zone’s upper left angle up and down.

- POS1-X: Move the zone’s upper right angle left and right.

- POS1-Y: Move the zone’s upper right angle up and down.

- POS2-X: Move the zone’s lower right angle left and right.

- POS2-Y: Move the zone’s lower right angle up and down.

- POS3-X: Move the zone’s lower left angle left and right.

- POS3-Y: Move the zone’s lower left angle up and down.

- Y level: The higher the number, the brighter the color of the zone will appear.

- CR level: The higher the number, the more red tone will be added to the zone’s color.

The

lower the number, the more green will be added to the zone’s color.

- CB level: The higher the number, the more red tone will be added to the zone’s color.

The lower the number, the more red will be added to the zone’s color.

- Trans: Set the mask’s transparency level from 0~3. The default value is 2.

BOXBOX

POLYGONPOLYGON

RETURN

ZONE NUM 0

ZONE DISP ON

POS0-X POS0-X

POS0-Y POS0-Y

POS1-X POS1-X

POS1-Y POS1-Y

POS2-X POS2-X

POS2-Y POS2-Y

POS3-X POS3-X

POS3-Y POS3-Y

Y LEVEL Y LEVEL

CB LEVEL CB LEVEL

CR LEVEL CR LEVEL

2 TRANS

RETURN

POLYGON

PRIVACY

PRIV