User Manual

22
SPECIAL
Mirror & Flip ONFlip ONMirror ONMirror / Flip OFF
CAM. TITLE
Add a name to the camera. Set the title by using the OSD joystick.
D-EFFECT
FREEZE Freeze image from the camera at the selected moment.
MIRROR Reflects the camera: OFF / MIRROR / V-FLIP / ROTATE
NEG. IMAGE Display the camera’s view in negative colors.
MOTION
- SELECT: The camera supports up to 4 separate motion detection areas. Select which one to
adjust.
- DISPLAY: For the selected zone, select ON to adjust its position and size. Use the joystick
controller on the camera’s board to adjust the zone’s position. Press the enter key and use the
joystick controller to adjust the zone’s size.
- SENSITIVITY: Set the camera’s sensitivity to motion. The higher the value, the more sensitive the
camera is to motion.
- COLOR: Set the color for the motion zone. Select from green, blue, white, or red.
- TRANS: Set the zone’s transparency. The lower the number, the more transparent the zone will
appear on the camera’s display.
- DEFAULT: Reset the motion detection settings to their default values.