Manual

OSD Menu_Privacy
You can hide some parts of the camera’s view to protect your privacy and sensitive data. A total
of 24 privacy masking zones are available, including 16 square zones and 8 polygon-shaped
zones.
Box
- Zone num: Select the zone number between 0~15.
- Zone disp: Select to show or hide the selected zone.
- H-POS: Move the zone’s position left or right. The higher the number, the zone
w
ill move to the right.
-
V-POS: M
ove the zone’s position up or down. The higher the number, the zone
will move down.
- H-Size: Adjust the zone’s width. The higher the number, the right-side panel of the
zone will move further to the right.
- V-Size: Adjust the zone’s height. The higher the number, the bottom side panel of
the zone will move further down.
- Y level: The higher the number, the brighter the color of the zone will appear.
- CR level: The higher the number, the more red tone will be added to the zone’s color.
The lower the number, the more green will be added to the zone’s color.
- CB level: The higher the number, the more red tone will be added to the zone’s color.
The lower the number, the more red will be added to the zone’s color.
- Trans: Set the mask’s transparency level from 0~3. The default value is 0.
ONBOX
POLYGON OFF
RETURN
0ZONE NUM
ZONE DISP ON
H-H-PH-POS
V-V-PV-POS
H-H-SIH-SIZE
ZE
10
10
10
0
V-V-SI
Y LEVEL
CB LEVEL
CR LEVEL
TRANS
RETURN
BOX
PRIVACY
PRIV
26