Manual

Installation - Instructions
Using the mounting template or your camera,
mark and drill the necessary holes in the
mounting surface.
Pull all necessary wires through and make the
proper connections. See pages 14.
Use the four (4) mounting screws to mount the
camera onto the mounting surface. See page
15 for tilting and pan adjustment options.
Adjust the camera's zoom and focus using the
manual levers at the base of the camera
module. See page 15 for more information.
When the installation is completed, place the
camera's dome over the camera's body using
the included four (4) screws.
Detach the protective cover from the dome to
complete the installation.
1
2
3
4
5
6
13