SNAP-IT Outdoor Dome Camera DWC-V4363D DWC-V4363TIR DWC-V4367WD DWC-V4367WTIR DWC-V4382TIR DWC-V4365T DWC-V4363DH DWC-V4382TIRH ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS Do not open or modify. Do not open the case except during maintenence and installation, for it may be dangerous and can cause damages. Do not put objects into the unit. Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages. Be careful when handling the unit. To prevent damages, do not drop the camera or subject it to shock or vibration. Do not install near electric or magnetic fields. Protect from humidity and dust.
TROUBLESHOOTING Before sending your camera for repair, check the following or contact our technical specialist. No VIDEO Check the coaxial cable and make sure it is connected securely. Check the lens’ iris adjustment at the menu setup of the camera. Check the power supply and make sure the camera has the proper voltage and current. Out-of-Focus VIDEO Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. Check the lens manual focal and zoom adjustment.
PART & DESCRIPTIONS* 2 3 C O M M O N 1 Lens 2 Power Input Connector 5 4 DC 12V /AC 24V Voltage 3 UPT 4 RS 485 5 Video Output Connector - BNC 6 Camera Control Board 7 Bubble 8 Upper Case 9 Flush Mount Case 12 10 Surface Mount Case 1 11 10 9 Assembly Screws #8 - 32 x 0.
INSTALLATION* Included with DW Outdoor Dome Camera 1. User Manual 2. Mounting Template 3. Four(4) Screw and Four(4) Dry Wall Anchors 4. L-Wrench 5. TORX-T20 Bolt 6. 2nd Video Jack 7. DC Plug 8. Tool 9.
DIMENSIONS IN MILLIMETERS* Flush Mount 137 101 17 121 28 98,8 54 Surface Mount 139 36 29 118,8 53,8 139 Top View 6 121
BASE INSTALLATIONS* Remove the dome cover by loosening the 3 screw located at the Lid(Upper). Vandal dome uses the torx screws. Use the supplied Torx Wrench. Surface Mount Using four ST4X35 screws provided, mount the surface mount plate to a sturdy surface. Using three screws, fix flush mount base to the surface mount plate. Flush Mount Using four ST4X35 screws supplied, mount the surface mount plate to a sturdy surface. T20 M4 X 16 1 2 3 Plastic Anchors ST4X35 ST #8 - 32 x 0.
MOUNTING ON ELECTRICAL JUNCTION BOX* Designed for both flush mount or surface mount applications, pre-drilled mounting holes on EasyView dome accommodate various electrical junction boxes, making installation easy and less time consuming. When mounting the flush mount base, surface mount plate, or both together, use the pre-drilled holes marked with the symbol for proper installation. 4S NO IR 4S IR NPT 3/4” Pipe Screws UNC 8-32 x 0.
CONNECTING TO MONITORS* Follow the diagram below to make proper connections to CRT Monitor or the Monitor. DC 12V / AC 24V CCTV Monitor IR NO IR Up Left Right Down 2nd Video Output Monitor 300.0 Power Connection - 12V DC / 24V AC Dual Voltage(Auto Polarity Detection and Protection) All cameras are equipped with a 2nd video output on the camera Main Board.
ADJUSTING THE VARI-FOCAL DC AUTO IRIS LENS* Follow the instructions provided below to make any lens adjustments. Focus Zoom DWC-V4363TIR DWC-V4367WTIR DWC-V4382TIR DWC-V4382TIRH 1 2 3 4 5 IR Zoom: Tele Focus: Far - Wide Near NO IR DWC-V4363D DWC-V4367WD DWC-V4365T DWC-V4363DH Loosen the Zoom & Focus screws. Using the screw, move it RIGHT or LEFT to the desired position. Once the desired adjustments have been made, tighten the screw to lock in place.
ADJUSTING 3-AXIS GIMBAL* The Gimbal mechanism yields maximum rotation and placement ad show below.
FEATURES* V4363D V 4 3 6 3 D 1/3” Sony Super HAD ⅡCCD 560 TV Lines 3.
MODULE OSD MENU* COLOR PRIVACY EXPOSURE FUNCTION DAY&NIGHT RGB MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC SYNC PRIVACY MOTION PRIVACY EXIT SETUP SYNC D&N MODE C_SUP A_SUP WB MODE R-Y GAIN B-Y GAIN BRIGHTNESS SHUTTER BLC / HME AGC STARLIGHT NIGHT-UP TITLE EDIT PC CONTROL (RS485 Control) LANGUAGE MONITOR OSD COLOR OMNI LENS DEFECT EXIT SAVE & EXIT FACTORY RESET 13
EXPOSURE BRIGHTNESS SHUTTER BLC/HME AGC 0 ~ 100 1/60 / FLK / 1/250 ~ 10000 / SENS-UP x2 ~ x256 OFF / BLC / HME HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) STARLIGHT NIGHT-UP EXIT JUMP AUTO(x2 ~ x256) / OFF NORMAL / HIGH EXIT / SAVE&EXIT / FACTORY SET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / AWT / PUSH LOCK / MANUAL / INDOOR / OUTDOOR 0 ~ 100 0 ~ 100 EXIT / SAVE&EXIT / FACTORY SET COLOR DAY & NIGHT Day & Night Mode AUTO : READ TIME(3~63) / S-LEVEL(0~100) / E-LEVEL(0~100) COLOR ▬► B&W : Switch
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC EXIT JUMP OFF / MIRROR / V-FLIP / ROTATE 0 ~ 31 0.05 ~ 1.00 OFF / ON OFF / ON OFF / ON (x1.
SYNC SYNC EXIT JUMP INTERNAL / LINE EXIT / SAVE&EXIT / FACTORY SET TITLE EDIT PC CONTROL (RS485 Control) OFF / ON CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400 / 4800 / 9600) The protocol is fixed pelco-D. ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL CRT / LCD Select LCD only if the camera is directly connected to the LCD monitor.
SPECIFICATIONS* MODEL DWC-V4363D General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508(V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 560 TV Lines (COLOR) 580 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption DC 12V: 2.3W / AC 24V: 2.
FEATURES* V 4 3 6 3 T I R V4363TIR 1/3” Sony Super HAD ⅡCCD 560 TV Lines 3.
MODULE OSD MENU* COLOR PRIVACY EXPOSURE FUNCTION DAY&NIGHT RGB MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC SYNC PRIVACY MOTION PRIVACY EXIT SETUP SYNC D&N MODE C_SUP A_SUP WB MODE R-Y GAIN B-Y GAIN BRIGHTNESS SHUTTER BLC / HME AGC STARLIGHT NIGHT-UP TITLE EDIT PC CONTROL (RS485 Control) LANGUAGE MONITOR OSD COLOR OMNI LENS DEFECT EXIT SAVE & EXIT FACTORY RESET 19
EXPOSURE BRIGHTNESS SHUTTER BLC/HME AGC 0 ~ 100 1/60 / FLK / 1/250 ~ 10000 / SENS-UP x2 ~ x256 OFF / BLC / HME HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) STARLIGHT NIGHT-UP EXIT JUMP AUTO(x2 ~ x256) / OFF NORMAL / HIGH EXIT / SAVE&EXIT / FACTORY SET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / AWT / PUSH LOCK / MANUAL / INDOOR / OUTDOOR 0 ~ 100 0 ~ 100 EXIT / SAVE&EXIT / FACTORY SET COLOR DAY & NIGHT Day & Night Mode AUTO : READ TIME(3~63) / S-LEVEL(0~100) / E-LEVEL(0~100) COLOR ▬► B&W : Switch
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC EXIT JUMP OFF / MIRROR / V-FLIP / ROTATE 0 ~ 31 0.05 ~ 1.00 OFF / ON OFF / ON OFF / ON (x1.
SYNC SYNC EXIT JUMP INTERNAL / LINE EXIT / SAVE&EXIT / FACTORY SET TITLE EDIT PC CONTROL (RS485 Control) OFF / ON CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400 / 4800 / 9600) The protocol is fixed pelco-D. ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL CRT / LCD Select LCD only if the camera is directly connected to the LCD monitor.
SPECIFICATIONS* MODEL DWC-V4363TIR General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508(V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 560 TV Lines (COLOR) 580 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption LED OFF (DC12V-2.3W / AC24V-2.5W) LED ON (DC12V-4.8W / AC24V-4.
FEATURES* V4367WD V 4 3 6 7 W D 1/3” Sony Super HAD ⅡCCD 580 TV Lines 3.
MODULE OSD MENU* EXPOSURE PRIVACY COLOR BRIGHTNESS SHUTTER BLC AGC MAX_DR STARLIGHT FUNCTION RGB DAY&NIGHT MOTION PRIVACY MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS SYNC SETUP SYNC D&N MODE C_SUP A_SUP WB MODE R-Y GAIN B-Y GAIN MASK 1 MASK 2 MASK 3 MASK 4 MASK 5 MASK 6 EXIT CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE OMNI LENS EXIT SAVE & EXIT FACTORY SET 25
EXPOSURE MAX_DR STARLIGHT EXIT JUMP 0 ~ 99 1/60 / 1/100 / FLC / 1/250 ~ 100000 / SENS-UP x2 ~ x256 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC (AUTO GAIN CONTROL) OFF / ON (0~20) (Electronic Wide Dynamic Range) AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT / SAVE&EXIT / FACTORY RESET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / ATW / MANUAL (AWC is recommended.
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS EXIT JUMP MOTION MOTION EXIT JUMP OFF / MIRROR / V-FLIP / ROTATE 0 ~ 49 0.45 ~ 1.00 / USER OFF / ON OFF / ON OFF / LOW / MIDDLE / HIGH 3D DNR (3D Digital Noise Reduction) OFF / ON(x1.0 ~ x3.
PRIVACY EXIT JUMP MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT / SAVE&EXIT / FACTORY SET SYNC MODE V_PHASE EXIT JUMP INTERNAL / AUTO 0 ~ 199 EXIT / SAVE&EXIT / FACTORY SET CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE 0 ~ 254 (RS485 ID) OFF / ON OFF / AUTO DPC (Dead Pixel Cancellation) CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.
SPECIFICATIONS* MODEL DWC-D4367WD General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508 (V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 580 TV Lines (COLOR) 600 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption DC12V:2.1W / AC24V:2.
FEATURES* V 4 3 6 7 W T I R D4367WTIR 1/3” Sony Super HAD ⅡCCD 580 TV Lines 3.
MODULE OSD MENU* EXPOSURE PRIVACY COLOR BRIGHTNESS SHUTTER BLC AGC MAX_DR STARLIGHT FUNCTION RGB DAY&NIGHT MOTION PRIVACY MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS SYNC SETUP SYNC D&N MODE C_SUP A_SUP WB MODE R-Y GAIN B-Y GAIN MASK 1 MASK 2 MASK 3 MASK 4 MASK 5 MASK 6 EXIT CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE OMNI LENS EXIT SAVE & EXIT FACTORY SET 31
EXPOSURE MAX_DR STARLIGHT EXIT JUMP 0 ~ 99 1/60 / 1/100 / FLC / 1/250 ~ 100000 / SENS-UP x2 ~ x256 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC (AUTO GAIN CONTROL) OFF / ON (0~20) (Electronic Wide Dynamic Range) AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT / SAVE&EXIT / FACTORY RESET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / ATW / MANUAL (AWC is recommended.
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS EXIT JUMP MOTION MOTION EXIT JUMP OFF / MIRROR / V-FLIP / ROTATE 0 ~ 49 0.45 ~ 1.00 / USER OFF / ON OFF / ON OFF / LOW / MIDDLE / HIGH 3D DNR (3D Digital Noise Reduction) OFF / ON(x1.0 ~ x3.
PRIVACY EXIT JUMP MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT / SAVE&EXIT / FACTORY SET SYNC MODE V_PHASE EXIT JUMP INTERNAL / AUTO 0 ~ 199 EXIT / SAVE&EXIT / FACTORY SET CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE 0 ~ 254 (RS485 ID) OFF / ON OFF / AUTO DPC (Dead Pixel Cancellation) CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.
SPECIFICATIONS* MODEL DWC-V4367WTIR General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508 (V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 580 TV Lines (COLOR) 600 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption LED OFF (DC12V:2.1W / AC24V:2.2W) LED ON (DC12V:4.5W / AC24V:4.
FEATURES* V 4 3 8 2 T I R V4382TIR 1/3” Sony Super HAD ⅡCCD 580 TV Lines OMNI-Focus 2.9~8.
MODULE OSD MENU* EXPOSURE PRIVACY COLOR BRIGHTNESS SHUTTER BLC AGC MAX_DR STARLIGHT FUNCTION RGB DAY&NIGHT MOTION PRIVACY MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS SYNC SETUP SYNC D&N MODE C_SUP A_SUP WB MODE R-Y GAIN B-Y GAIN MASK 1 MASK 2 MASK 3 MASK 4 MASK 5 MASK 6 EXIT CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE OMNI LENS EXIT SAVE & EXIT FACTORY SET 37
EXPOSURE MAX_DR STARLIGHT EXIT JUMP 0 ~ 99 1/60 / 1/100 / FLC / 1/250 ~ 100000 / SENS-UP x2 ~ x256 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC (AUTO GAIN CONTROL) OFF / ON (0~20) (Electronic Wide Dynamic Range) AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT / SAVE&EXIT / FACTORY RESET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / ATW / MANUAL (AWC is recommended.
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS EXIT JUMP MOTION MOTION EXIT JUMP OFF / MIRROR / V-FLIP / ROTATE 0 ~ 49 0.45 ~ 1.00 / USER OFF / ON OFF / ON OFF / LOW / MIDDLE / HIGH 3D DNR (3D Digital Noise Reduction) OFF / ON(x1.0 ~ x3.
PRIVACY EXIT JUMP MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT / SAVE&EXIT / FACTORY SET SYNC MODE V_PHASE EXIT JUMP INTERNAL / AUTO 0 ~ 199 EXIT / SAVE&EXIT / FACTORY SET CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE 0 ~ 254 (RS485 ID) OFF / ON OFF / AUTO DPC (Dead Pixel Cancellation) CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.
SPECIFICATIONS* MODEL DWC-V4382TIR General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508 (V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 580 TV Lines (COLOR) 600 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption LED OFF (DC12V:2.1W / AC24V:2.2W) LED ON (DC12V:4.5W / AC24V:4.
REMOTE CONTROL* Key Button REMOTE CONTROL Instructions 1) Set the camera ID in OSD menu.(The default setting is “001”) NOTE : If the camera ID is modified, the new camera ID must be set, and the power must be turned ON and OFF. Then the Zoom Function Control camera is able to recognize the new ID. 2) Press the “KEY” and the camera turns into the standby image. The LED flickers for 20 seconds. 3) Input ID number of CAMERA to Remote Controller ID number.
FEATURES* V4365T V 4 3 6 5 T 1/3” Pixim Seawolf CMOS Sensor 690 Horizontal TV Lines 3.
MODULE OSD MENU* EXPOSURE PRIVACY COLOR BRIGHTNESS AE PREFERENCE BLC WDR AGC STARLIGHT METER ZONE FUNCTION MOTION MIRROR SHARPNESS GAMMA 3D DNR D-ZOOM SYNC D&N MODE PRIVACY MOTION PRIVACY EXIT SETUP SYNC 44 RGB DAY&NIGHT WB MODE COLOR GAIN PC CONTROL TITLE LANGUAGE MONITOR OMNI LENS FLUORESCENT DIGITAL VIDEO OUT EXIT SAVE & EXIT FACTORY RESET
EXPOSURE BRIGHTNESS AE PREFERENCE BLC WDR AGC STARLIGHT METER ZONE EXIT JUMP -48 ~ 60 OUTDOOR / INDOOR OFF / BLC (PERCENTILE 10 ~ 50) LOW / NORMAL / MEDIUM / HIGH / CUSTOM LOW / MEDIUM / HIGH / CUSTOM x2 ~ x64 / OFF ADJUST ZONE 1 / ADJUST ZONE 2 EXIT / SAVE&EXIT / FACTORY SET WB MODE COLOR GAIN EXIT JUMP -8 ~ 8 EXIT / SAVE&EXIT / FACTORY SET D&N MODE AUTO / AUTO(EXT) / COLOR / B&W COLOR DAY & NIGHT AWC / ATW(2,000K ~ 11,000K) / PUSH LOCK / MANUAL(KELVIN : 2,000K ~ 11,000K / R/B:RED : -20 ~ 20 BLUE :
FUNCTION MIRROR SHARPNESS GAMMA 3D DNR D-ZOOM EXIT JUMP MOTION MOTION EXIT JUMP PRIVACY PRIVACY EXIT JUMP 46 OFF / MIRROR / V-FLIP / ROTATE -8 ~ 8 25(0.25) ~ 100(1.0) MOVIE / INFO ZOOM : 1(x1.
SYNC SYNC EXIT JUMP INT1(SYNC to 59.94Hz)/INT2(SYNC to 60.
SPECIFICATIONS* Model DWC-V4365T General Spec NTSC CCD Type 1/3" 420K Pixels Color PAL Total num ber of pixels 768(H) X 548(V) Minimum Illum ination 0.22Lux (F1.2, 30IRE-COLOR) Resolution H: 690 TV Lines Effective 0Lux (LED ON) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption DC12V-3.1W(FAN ON:4.9W) AC24V-3.2W(FAN ON:5.0W) COMMON General Spec NTSC Shutter speed 1/25 ~ 1/30,720 sec S/N Ratio 53dB or More(AGC OFF) Gam m a 0.
FEATURES* V 4 3 6 3 D H V4363DH 1/3” Sony Super HAD ⅡCCD 560 TV Lines 3.
MODULE OSD MENU* COLOR PRIVACY EXPOSURE FUNCTION MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC SYNC D&N MODE C_SUP A_SUP PRIVACY MOTION PRIVACY EXIT SETUP SYNC 50 DAY&NIGHT RGB WB MODE R-Y GAIN B-Y GAIN BRIGHTNESS SHUTTER BLC / HME AGC STARLIGHT NIGHT-UP TITLE EDIT PC CONTROL (RS485 Control) LANGUAGE MONITOR OSD COLOR OMNI LENS DEFECT EXIT SAVE & EXIT FACTORY RESET
EXPOSURE BRIGHTNESS SHUTTER BLC/HME AGC 0 ~ 100 1/60 / FLK / 1/250 ~ 10000 / SENS-UP x2 ~ x256 OFF / BLC / HME HIGH / MIDDLE / LOW / OFF AGC(Auto Gain Control) STARLIGHT NIGHT-UP EXIT JUMP AUTO(x2 ~ x256) / OFF NORMAL / HIGH EXIT / SAVE&EXIT / FACTORY SET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / AWT / PUSH LOCK / MANUAL / INDOOR / OUTDOOR 0 ~ 100 0 ~ 100 EXIT / SAVE&EXIT / FACTORY SET COLOR DAY & NIGHT Day & Night Mode AUTO : READ TIME(3~63) / S-LEVEL(0~100) / E-LEVEL(0~100) COLOR ▬► B&W : Switch
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC EXIT JUMP OFF / MIRROR / V-FLIP / ROTATE 0 ~ 31 0.05 ~ 1.00 OFF / ON OFF / ON OFF / ON (x1.
SYNC SYNC EXIT JUMP INTERNAL / LINE EXIT / SAVE&EXIT / FACTORY SET TITLE EDIT PC CONTROL (RS485 Control) OFF / ON CAM ID / ID DISPLAY (OFF/ON) / BAUDRATE (2400 / 4800 / 9600) The protocol is fixed pelco-D. ENG / KOR / JPN / CHN1 / CHN2 / RUS / FRAN / SPAN / ITAL CRT / LCD Select LCD only if the camera is directly connected to the LCD monitor.
SPECIFICATIONS* MODEL DWC-V4363DH General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508(V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 560 TV Lines (COLOR) 580 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption DC12V: 2.3W(HEATER ON:6.0W) AC24V: 2.5W(HEATER ON:6.
FEATURES* V4382TIRH V 4 3 8 2 T I R H 1/3” Sony Super HAD � CCD 580 TV Lines OMNI-Focus 2.9~8.
MODULE OSD MENU* EXPOSURE PRIVACY COLOR BRIGHTNESS SHUTTER BLC AGC MAX_DR STARLIGHT FUNCTION MOTION SYNC PRIVACY SETUP SYNC D&N MODE C_SUP A_SUP MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS 56 RGB DAY&NIGHT WB MODE R-Y GAIN B-Y GAIN MASK 1 MASK 2 MASK 3 MASK 4 MASK 5 MASK 6 EXIT CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE OMNI LENS EXIT SAVE & EXIT FACTORY SET
EXPOSURE MAX_DR STARLIGHT EXIT JUMP 0 ~ 99 1/60 / 1/100 / FLC / 1/250 ~ 100000 / SENS-UP x2 ~ x256 OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF AGC (AUTO GAIN CONTROL) OFF / ON (0~20) (Electronic Wide Dynamic Range) AUTO (x2 ~ x256) / OFF (x32 is recommended for low light application.) EXIT / SAVE&EXIT / FACTORY RESET WB MODE R-Y GAIN B-Y GAIN EXIT JUMP AWC / ATW / MANUAL (AWC is recommended.
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS EXIT JUMP MOTION MOTION EXIT JUMP 58 OFF / MIRROR / V-FLIP / ROTATE 0 ~ 49 0.45 ~ 1.00 / USER OFF / ON OFF / ON OFF / LOW / MIDDLE / HIGH 3D DNR (3D Digital Noise Reduction) OFF / ON(x1.0 ~ x3.
PRIVACY EXIT JUMP MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT / SAVE&EXIT / FACTORY SET SYNC MODE V_PHASE EXIT JUMP INTERNAL / AUTO 0 ~ 199 EXIT / SAVE&EXIT / FACTORY SET CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE 0 ~ 254 (RS485 ID) OFF / ON OFF / AUTO DPC (Dead Pixel Cancellation) CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.
SPECIFICATIONS* MODEL DWC-V4382TIRH General Spec NTSC PAL CCD Type 1/3" 410K Pixels Color 1/3" 470K Pixels Color Total num ber of pixels 811(H) X 508(V) 795(H) X 596(V) Minimum Illum ination 0.14Lux (F1.2, 30IRE-COLOR) 0Lux (LED ON) Resolution 580 TV Lines (COLOR) 600 TV Lines (BW) Electric Spec Voltage DC 12[V] (11.0[V] ~ 20.0[V]) AC 24[V] (20.0[V] ~ 30.0[V]) Pow er Consum ption OFF (DC12V: 2.1W / AC24V: 2.2W) LED ON (DC12V: 4.5W / AC24V: 4.6W) HEATER ON (DC12V: 5.4W / AC24V: 5.
REMOTE CONTROL* Key Button REMOTE CONTROL Instructions 1) Set the camera ID in OSD menu.(The default setting is “001”) NOTE : If the camera ID is modified, the new camera ID must be set, and the power must be turned ON and OFF. Then the Zoom Function Control camera is able to recognize the new ID. 2) Press the “KEY” and the camera turns into the standby image. The LED flickers for 20 seconds. 3) Input ID number of CAMERA to Remote Controller ID number.
WARRANTY INFORMATION* Digital Watchdog (referred to as “the Warrantor”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows: LABOR : For the initial two (2) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warrantor will repair or replace the unit with a new or refurbished product at its option at no charge.
LIMITS AND EXCLUSIONS* There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including, without limitation or damage to recording media) resulting from the use of these products, or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
5436 W Crenshaw St. Tampa, FL 33634 Tel : 866-446-3595 / 813-888-9555 Fax : 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.
