6OJWFSTBM )% PWFS $PBY¥ .
DWC-T8553TIR, DWC-T8563TIR Table of Contents 1 2 3 4 5 6 7 8 9 10 11 12 FEATURES............................................................ 3 DIMENSIONS ........................................................ 4 2.1 DWC-T8553TIR ............................................. 4 2.2 DWC-T8563TIR ............................................. 4 PRODUCT ACCESSORIES..................................... 5 INSTALLATION...................................................... 6 CHANGING THE CAMERA’S SIGNAL .......
Universal HD over Coax® 5MP Camera 1 FEATURES 6OJWFSTBM )% PWFS $PBY¥ UFDIOPMPHZ XJUI )% "OBMPH )% 57* )% $7* BOE BMM MFHBDZ BOBMPH TJHOBM TVQQPSU 5MP 1/2.7" image sensor at 20fps / 4MP at real-time 30fps 2.8mm fixed lens (DWC-T8553TIR model) 2.
DWC-T8553TIR, DWC-T8563TIR 2 DIMENSIONS 2.1 DWC-T8553TIR 2.2 DWC-T8563TIR 4.33" (110mm) 3.74" (95mm) 4.
Universal HD over Coax® 5MP Camera 3 PRODUCT ACCESSORIES Please check if all of the camera parts and accessories are included in the package before proceeding.
DWC-T8553TIR, DWC-T8563TIR 4 INSTALLATION 1. The mounting surface must withstand three times the weight of your camera. 2. Do not let the cables get caught in improper places for the electric line cover can be damaged. This may cause a short or fire. 3. Using the mounting template, sheet or the camera itself, mark and drill the necessary holes in the wall or ceiling. 4. Do not remove the protective film until 5. Pass wires through the mounting the installation I completed.
Universal HD over Coax® 5MP Camera 5 CHANGING THE CAMERA’S SIGNAL The camera supports three analog signals: HD-Analog, HD-TVI, HD-CVI and analog signal up to 960H. In order to switch the camera’s signal between the available options, locate the button switch on the signal cable. The video outputs will recycle by holding and pressing the button in the video switch cable for 5 seconds. NOTE: The camera’s factory default resolution is 4MP at 30fps.
DWC-T8553TIR, DWC-T8563TIR 6 CONNECTING TO DVR/ENCODER Use the diagram below to connect to a Universal DVR or CRT Monitor properly. Use the diagram below to connect the camera to a proper power supply.
Universal HD over Coax® 5MP Camera 7 ADJUSTING THE CAMERA ANGLES Adjust the camera to obtain an optimum angle by MPPTFOJOH UIF DBNFSBhT MPDL TDSFX. The camera’s max angles are: Pan: 0 ~ 360 Tilt: 0 ~ 90 'PS %8$ 5 5*3 UIF DBNFSB IBT POF MPDL TDSFX MPDBUFE VOEFS UIF DBNFSBhT MFOT 'JYFE TDSFX If your camera supports a vari focal lens (DWC-T8563TIR models only), you can adjust the camera’s zoom and focus from the camera’s OSD menu via UTC. See section 8.6 Auto Focus for more information.
DWC-T8553TIR, DWC-T8563TIR 8 OSD MENU TREE This camera supports Up the Coax communications (UTC). This means that all control over the camera’s OSD menu and settings can be done directly from the DVR itself. Please note that the DVR must also support UTC in order to control and setup the camera remotely. 8.1 LENS Adjust the camera’s lens between DC and manual options. Manual mode supports the fixed board lens or the manual iris lens. When you are done, go to SAVE&END to shave the new settings. 8.
Universal HD over Coax® 5MP Camera 8.3 WHITE BALANCE The camera’s white balance can be set to AWT or AWC. ATW: The camera will constantly adjust the white balance automatically, compensating for temperature changes between 2200~10500K. AWC SET: Fix the white balance values according to the current color temperature settings in the camera’s view. The camera will not monitor the color temperature changes and remain set to the current settings. 8.
DWC-T8553TIR, DWC-T8563TIR 8.5 ADJUST NR (Noise Reduction): You can adjust the camera’s digital noise reduction settings to 2DNR and 3DNR. Digital noise reduction helps decrease digital noise in low lightning and make the image more thorough. Increasing the value of the digital noise reduction will make improve the digital noise reduction effect but it may also reduce the image resolution. Sharpness: Set the image’s sharpness.
Universal HD over Coax® 5MP Camera 8.6 AUTO-FOCUS For motorized zoom cameras (DWC-T8563TIR models), auto focus function can be adjusted. For DWC-T8553TIR models, please skip this section. AF Mode: Select from: SEMI, AUTO or MANUAL. ONE SHOT AF: Select this option to focus the camera instantly based on the current settings and view. TDN AF: If enabled, the lens will automatically focus when the system switches between day (color) and night (B/W) mode. LENS INIT: Select this option to restart the lens.
DWC-T8553TIR, DWC-T8563TIR 9 TROUBLESHOOTING Before sending your camera for repair, check the following or contact our technical specialist. FOR NO VIDEO Check the coaxial cable and make sure it is connected securely. Check the power supply and make sure the camera has the proper voltage and current. FOR OUT-OF-FOCUS VIDEO Check the Front case cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. The use of a field test monitor is recommended.
Universal HD over Coax® 5MP Camera 10 SPECIFICATIONS 10.
DWC-T8553TIR, DWC-T8563TIR 10.
Universal HD over Coax® 5MP Camera There are no express warranties except as listed. The warrantor will not be liable for incidental or consequential damages (including damage to recording media without limitation) resulting from the use of these products or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
DWC-T8553TIR, DWC-T8563TIR 12 WARRANTY INFORMATION Digital Watchdog (referred to as “the Warrantor”) warrants the Digital Watchdog Camera against defects in materials or workmanship as follows: LABOR: For the initial five (5) years and one (1) year on IR LED from the original purchase date, if the camera is determined to be defective, the Warrantor will repair or replace the unit with a new or refurbished product at its option at no charge.
Universal HD over Coax® 5MP Camera
