User Guide

Quick Start Guide

Speciﬁcations and pricing are subject to change without notice.

INSTALLATION

UNLOCK

LOCK

Ceiling mount

Camera base

Camera dome cover

1 Using the mounting template or the mounting bracket itself, mark and drill the

necessary holes on the mounting surface.

2 Secure the mounting bracket to the mounting surface using the screws and

anchors included. Use the mounting pad between the bracket’s arm and

mounting surface as needed.

3 Ax the safety wire at the bottom of the mounting bracket’s case. Connect the

other side of the safety wire to the base of the camera.

4 Pass wires through and make all necessary connections.

5 Secure the camera to the mounting bracket using

the included screws. Align the indented lines on the

side of the camera with the lines on the mounting

bracket as seen in the image on the right.

Rotate the camera clockwise to lock into position.

6 Adjust the camera modules’ position and angle and complete the installation

by placing the dome cover on the camera. Secure the dome cover to the camera

base using the screws included with the camera. See the camera’s QSG for

more information.

NOTE: Do not touch the lenses when handling the camera modules.

Rev: 08/22