User Manual

1
Detach the dome cover by torx wrench provided from
boom case before installaon the camera.
2
Using the template sheet, make the cabling hole on the
wall/ceiling.
4
Once removing the rubber stopper, fix the boom case
on the ceiling.
6
Aach the dome cover to the boom case.
7
Detach the protecon film from the dome cover.
5
To achieve desired view direcon and orientaon, rotate
3-axis gimbal. To fix the seng, ghten the lt stopper
screw.
Installaon
Installaon -
3
2
7
6
5
4
3
2
Template Sheet
3
Connect the network cable, power cable respecvely.
See the secon ‘Installaon - Cabling’ for details.
a
b
c
Put the Lan cable into (a), then (b) will be assembled to (a)
making any space.
ghtly. As a final step, (c) need to be assembled to (b) without
Tilng Angle can be adjusted by screw.
8