User Manual

Detach the dome cover by torx wrench provided from

boom case before installaon the camera.

Reset to the Factory Defaults

Press the reset buon for 5 seconds to return the setup

to the Factory Default.

Warning:

If you press the ‘Reset’ buon, you will lose all seng data.

If needed, please, make a note for further installaon.

Match the one screw hole on the dome cover and camera

boom specially.

Disassemble the camera

Installaon -

Before installing your camera, you have to read the following cauons.

1. Make sure the mounting surface can withstand three times the weight of the

camera.

2. Do not let the cables get caught in improper places or the electric line cover be

damaged. This can cause a short or fire.

3. For the installation process, remove the dome cover from the camera module.

Reset Buon