User Manual

1
VIN Source - Select the Video 1 ~ Video 4 and Set the video setup.
Click 'apply' to set the other video setting.
2
Target Stream - Select the stream you want to set.
3
Time out - Set the RTSP time out.
Thesessionisdisconnectedafterthespecifiedtimeout.
4
RTP Multicast -CheckRTPMulticastOn/Off.ToactivateRTPMulticast.
1. Click “On” button.
2. Enter accessible RTP Multicast IP, port for video stream control, RTP packet TTL.
3. Click “Apply” button.
It is possible to set each RTP Multicast for CH1~3.
5
Click‘Apply’tomakeabovesettingeffective.
Click this button when completed setup each channels.
6
It shows RTSP Connection information.
Setup - Network Setup
RTSP Information
3
6
1
2
4
5
47