User Manual

To send / save the image to the relevant sites by Email, SMTP needs to be setup.
1
General Setting - SMTP function can be enable or disable.
2
Mode - Select Security mode of SMTP from Plain or SSL / TLS. After checking account setup of your SMTP Server,
you may select one.
3
SMTP Server Address - DefinetheSMTPServerAddress.IftheIPAddressformisincorrect,aMessageboxwillbeshownto
try again.
4
Port - DefinethePortusedinthePlainorSSL/TLSsecuritymodeintheabove.
5
User ID - DefinetheUserIDtoaccesstoSMTPServer.FilloutthecorrectUserIDregisteredintheSMTPServer.
6
Password -DefinethePasswordtoaccesstoSMTPServer.FilloutthecorrectPasswordregisteredintheSMTPServer.
7
E-Mail Sender -Definethee-mailaddressofE-MailSender.ItwillbedisplayedasthesenderwhenthecamerasendsanE-mail.
8
E-Mail Receiver -Definethee-mailaddressofE-MailReceiver.ItwillbedisplayedastheReceiverwhenthecamerasends
an E-mail.
9
Title - DefinethetitleoftheE-MailwhenthecamerasendsanE-mail.
The title of the Email is limited to 40 characters including the spaces.
10
Message -DefinethecontentsofE-MailwhencamerasendsanE-mail.ThemessageoftheEmailislimitedto40
characters including the spaces.
11
Click‘Apply’tomakeabovesettingeffective.
Setup - Network Setup
SMTP Settings
1
2
3
4
5
6
7
9
8
10
11
45