User Manual

To transfer / save the image to the relevant sites through FTP, then FTP needs to be setup.
1
General Setting - FTP function can be enable or disable.
2
FTP Server Address -DefineFTPServerIPAddress.IfIPAddressformisincorrect,aMessageboxwillbeshowntotryagain.
3
FTP Upload Path -DefineapathinFTPservertostorevideo.Forthepathname,EnglishAlphabets,
numbers and special characters ( / ~ !@ $ ^ ( ) _ - { } [ ] ; , ) can be used.
4
FTP Port -DefinetheFTPServerPort.IfPortisnotappropriate,itisimpossibletoaccesstoFTPServer.
5
User ID -DefineUserIDtoaccesstotheFTPServer.FilloutthecorrectUserIDregisteredintheFTPServer.
6
Password -DefinePasswordtoaccesstotheFTPServer.FilloutthecorrectPasswordregisteredintheFTPServer.
7
Click‘Apply’tomakeabovesettingeffective.
Refer the above screen image for the example.
Setup - Network Setup
FTP Settings
1
2
3
4
5
6
7
44