Instruction Manual

31
1
VIN Source - Each of the camera's sensors must be set up separately. Select between Video 1 ~ Video 4 for
each of the camera's sensors. The settings below will apply to that sensor only.
Click 'Save' to save the settings before changing to another video source.
2
3D Noise Reduction - Reduce digital noise (image graininess) in the image while retaining good video quality
in low light conditions. The default value is 5.
3
Mirror - When activated, reverses the video image horizontally.
4
Flip - When activated, reverses the video image vertically.
5
Click ‘Save’ to save the current settings.
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
Setup - Camera Setup
Camera Image Enhancement
2
3
4
5
1