Instruction Manual

26
1
VIN Source - Each of the camera's sensors must be set up separately. Select between Video 1 ~ Video 4 for
each of the camera's sensors. The settings below will apply to that sensor only.
Click 'Save' to save the settings before changing to another video source.
2
Sharpness - Adjust the sharpness of the image as needed.
3
Brightness - Adjust the brightness of the image as needed.
4
Contrast - Adjust the contrast of the colors in the image as needed.
5
Saturation - Adjust the saturation of colors in the image as needed.
6
Hue - Adjust the hue of the image as needed.
7
Click ‘Save’ to save the current settings.
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
Setup - Camera Setup
Camera Image Adjustment
2
1
3
6
5
4
7