Instruction Manual

18
1
VIN Source - Each of the camera's sensors must be set up separately. Select between Video 1 ~ Video 4 for
each of the camera's sensors. The settings below will apply to that sensor only.
Click 'Apply' to save the settings before changing to another video source.
2
Live Video Channel Setup - The video can be configured to various settings with a combination of codec and
resolution. The camera performance should be considered when setting multiple channels, as the performance
of the camera will be affected.
H.265 (HEVC) codec with a higher bitrate may cause unstable live streaming or reload the webpage.
3
Codec - Choose the video codec. Depending on the selected codec, the subcategories may vary.
4
Description - Enter additional description for the selected channel. There is a limit maximum of 30
alphanumeric characters, including spaces.
5
Resolution - Select video resolution.
Available Frame Rate may vary even if the same codecs are in use.
6
Frame Rate - Select the maximum Frame Rate.
Available Frame Rate may vary even if the same codecs are in use.
Setup - Video & Audio Setup
Video Configuration
3
1
4
5
6
2
QFHD
2560x1440
(4M)
1080p/i 720p/i SVGA
768x432
(0.3M)
4CIF VGA
640x360
(0.2M)
CIF
3840x2160 2560x1440 1920x1080 1280x720 800x600 768x432
704x576
704x480
640x480 640x360
352x288
352x240