Manual

S etup -
T r ansf er S etup
44
This function is enabled when the codec is set to “MJPEG”
for channel 2 at “Setup-Video setup”.
Transfer Mode
Select from Disable, FTP and E-Mail (SMTP).
To use image transfer, FTP and SMTP in the next sections must
be configured properly.
Pre/Post Alarm Image
Image Transfer due to event is configured by setting Image
transfer rate and Pre/Post alarm duration.
Descriptions
Number
of Image
Define Number of image transferred per second.
Pre-alarm
Duration
Define duration of image transfer before an event.
Post-alarm
Duration
Define duration of image transfer after an event.
Range of Pre/Post alarm duration varies according to the
number of image setting.
Click ‘Apply’ to save all changes.
1
2
3
1
3
2