Manual

S etup -
M otion D et ection S etup
42
Activation Time
Select activation time from Always / Only Scheduled Time.
Action
Define a counter action from Alarm Output / Alarm Image
transfer when motion is detected.
To setup schedule, you need to define Start time and End time
followed by selecting Days.
If End time is earlier than Start time, End time is regarded as next
day.
Ex) Assume you select Tue. If you set Start time as 16:00 and End
Time as 09:00, Alarm Input will work from 4:00pm Tue to
9:00 am Wed.
“Alarm output, Output duration” can only be set with cameras
which supports alarms.
Click ‘Apply’ to save all changes.
1
2
3
1
2
3
Always
An alarm is activated whenever motion is
detected.
Only
Scheduled Time
An alarm event is activated only when motion
is detected during the scheduled time.
Action
Description
Alarm Image
Transfer
Turn ON / OFF Image Transfer. Send image via
E-mail or FTP server. (For more detail see
Transfer Setup in this chapter)
Alarm Output
Activate alarm out (relay).
Output
Duration
Select time duration to maintain output.