Manual

S etup -
A lar m I nput S etup
41
Input Device Setup
Select input device type from OFF / N.O. / N.C.
Operation
Off
Ignore this Input sensor.
NO
The contact is normally open and closed when activated.
NC
The contact is normally closed and open when activated.
Activation Time
Select activation time from Always / Only Scheduled Time.
Always
An alarm event is activated whenever sensor
Input is detected.
Only
Scheduled Time
An alarm event is activated only when sensor
input is detected during the scheduled time.
To setup the schedule, you need to define Start time and End time
followed by selecting Days.
If End time is earlier than Start time, End time is regarded as next
day.
Ex) Assume you select Tue. If you set Start time as 16:00 and End
Time as 09:00, Alarm Input will work from 4:00pm Tue to
9:00am Wed.
Action
Define a counter action from Alarm Output / Alarm Image
Transfer / Camera Action when Alarm Input is detected.
Action
Description
Alarm Image
Transfer
Turn ON / OFF Image Transfer. Send image via
E-mail or FTP server. (See Transfer Setup for
more information).
Alarm Output
Activate alarm out (relay).
Output
Duration
Select time duration to maintain output.
Camera
Action
Setup the Camera Action when Alarm in.
Action
Duration
Select time duration to maintain action.
Click ‘Apply’ to save all changes.
1
2
3
4
1
2
4
3