Manual

33
ORIGIN CHECK
If you find the dome in the wrong position during operation, execute this origin check and the dome
camera will return to the right position after the origin check operation.
ORIGIN CHECK
ARE YOU SURE?
CANCEL
OK
• FUNCTION RUN
Execute the function when you use a DVR without function keys (Preset. Pattern, Tour and Scan).
FUNCTION RUN SETUP
(CTRL KEY)
PRESET : ---
PATTERN : ---
TOUR : ---
SCAN : ---
HOME
AUTO PAN
ALARM OUT : ----
EXIT(ESC TO EXIT)
1. Select the desired Function by pressing the Up or Down key.
2. Select the number by pressing the Tele or Wide key in PRESET, PATTERN, TOUR and SCAN.
3. Press the IRIS Open key to execute.
NOTE: Save the function (PRESET, PATTERN, TOUR and SCAN) before executing it.
- HOME
Select “HOME” and press the IRIS Open key. The dome camera will go to the default position after
assigned period of inactivity passes. The default position may be a Preset, Tour, Pattern or no action.
- AUTO PAN
You can execute the endless auto pan to turn in one direction continuously by selecting Auto-Pan.
- ALARM OUT
This function can operate only when the alarm out setup has the time in the alarm menu.
Ex)
ALARM OUT SETUP
OUT1 : ALARM
OUT2 : 1 MIN
EXIT(ESC TO EXIT)
Press the IRIS Open key, then that alarm out will operate during setting time only.