Manual

20
8. To edit the “TITLE”, follow the procedure of the Auto Scan above to edit titles.
9. Select “SAVE AND EXIT” and press the Right key.
You can expand the Tour sequence by calling other programmed Tours.
NOTE: The speed applies in the vector mode only.
NOTE: In Tour mode, in conjunction with Preset and Auto Scan, you can make the camera travel from
a Preset to another Preset at a specific speed.
Example: Preset 001>002>003>004>005>006, Auto Scan 01 starts at Preset 002, ends at Preset 003,
Auto Scan 02 starts at Preset 005, ends at Preset 006;
Tour 001, 002, A01, 004, A02.
1  2 2~3  4  5~6, repeat
where  : Quick move, ~ : Programmed speed
To assign the functions other than Preset in the Tour when the function key is not existed:
Move the cursor to a stored Preset.
Pressing the IRIS Open key will change the Preset number to other function (Auto Scan, Pattern, Tour or
Preset) with the first programmed number.
To change the number, press the Tele or Wide key.