Manual

18
Select “MOTION SETUP” and press the Left or Right key. Then the MOTION setup displays.
MOTION SETUP
SENSITIVITY: 10
POSITION : ALL
DELAY : 00 SEC
OUTPUT : OFF
HOLD TIME : 03 SEC
EXIT(ESC TO EXIT)
Set SENSITIVITY 00 ~ 20
Set POSITION ALL, CENTER
Set DELAY 00 ~ 05 seconds
Set OUTPUT OFF, OUT1, OUT2
Set HOLD TIME 03 ~ 99 seconds
Select “AE SETUP” and press the Left or Right key. Then the AE setup displays. Refer to the AE SETUP
in the camera setup.
6. Set “DWELL time”. (03 ~ 99 seconds)
7. To select the next page of Presets, scroll the page by pressing the Left or Right key on the first or last
columns of the menu.
8. Repeat step 2 through 7 for each additional Preset position.
9. Select “SAVE AND EXIT” and press the Right key.
NOTE: Press the HOME key at programmed Preset position (*) to delete a programmed Preset.