Specifications
GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
26
Disk Configuration
In the Storage menu, remember to save the new settings after making
changes. If not, the new settings will not be applied to the system.
The
system will initializes the menu to the basic setting.
Auto Deletion
Set a limit on the number of days within a month your VMAXD1 can record.
Select from None, 1Day, 7Days, 30Days, or User Setting (1-31).
HDD Overwrite
£ Turn ON or OFF.
If ON is selected and the HDD runs out of free space, the VMAXD1 will
overwrite the existing files beginning with the oldest data. If OFF is
selected, the VMAXD1 will not record.
Local Storage Management
Local Storage Management is where the internal hard disk and storages connected to the system via USB are managed. Local Storage
Management classifies the different storage devices into the three categories—New, Recording, and Backup.
New: All storages, initially detected, are directly managed into [New], but they can be transferred into [Recording] or [Backup].
Select storage in the New category, and click the left mouse button. Then select Record-Init or Backup-Init.
Record-Init: Transfers the selected storage from New to Recording
Backup-Init: Transfers the selected storage from New to Backup.
At least one of the storage should be sent to [Recording]. Otherwise,
recorded data will not be stored in real-time.
Recording: Storage devices place in Recording will only be used to store recorded data. The recorded data will be saved in real-time. In
the Recording category, five commands can be executed. However, depending on the software status, some commands may not work.
The commands are as follows:
New: Returns the selected storage device back to the New category.
Online: Changes the selected storage device to Online state.
Offline: Changes the selected storage device to Offline state.
Format: Format the selected storage.
Eject: Completely removes the selected storage from the software.
When the VMAXD1 is in Healthy or Warning state, the above commands
will be executed. However, if the VMAXD1 is in a Fa
ult state, no commands
will be executed.