Specifications

GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
22
Alarm
This feature is used to generate alarms through the PTZ Preset, E-mail, Spot 1, Popup, and/or Callback in case of an event. You can
configure up to eight presets (1-8).
ଖ
Popup function is to inform event occurrence to the user through a
warning window in the real-time monitoring mode.
Buzzer: Makes a beep sound when event is triggered.
PTZ Preset: Set preset number. When event is triggered, PTZ camera will move to the selected preset.
E-mail: When an event is triggered, the VMAXD1 will send user an e-mail.
Setup your email at [Setup] > [Network Config] > [E-mail].
Relay: When an event is triggered, relay out will be activated.
Spot: When an event is triggered, user will receive popup on spot monitor.
Popup: In real time recording mode, a Warning window will appear. This window will inform the user when an event occurs.
Callback: This will transmit a signal to a callback server located at a remote site and will begin recording automatically.
ཛ Turn ON the Callback funtion.
ཛྷ Set your Callback Server IP, Port Number, User ID, and event type.
ཝ Select one of the registered users.