Specifications

GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
14
Camera
Right-click mouse button; then select [Setup] > [Camera].
Camera
To setup a camera, select the Camera tab.
Connect: Connect or disconnect the camera channel. ON means cameras is connected. To disconnect, turn camera OFF.
୔
When the camera channel is set to disconnected, the video contents
will not be displayed even if the camera is actually connected.
Name: Name each camera.
£ Move mouse cursor above the name field and double click the left mouse button.
¤ Input camera name on input panel. Up to 20 letters are allowed.
Covert: Turn ON to hide the camera on the monitoring screen and display a black screen.
୔
Although the display screen is black, data is still being recorded and
saved, depending on the recording schedule.
PZ Mask: Used to hide a certain area of the real-time monitoring screen.
£ To setup the PZ Mask Area, move cursor above the PZ Mask field for the channel you wish to set and click the left mouse button.
¤ The channel will be displayed with grid lines. Select the blocks you wish to mask by clicking and dragging the mouse.
¥ Right click mouse button when setup has been completed.
Adjust: Select to adjust the camera’s Brightness, Contrast, Color, Saturation,
Sharpness, and Camera Position. When clicked, the single channel mode appears
with the Adjust window.
Excessively moving the camera up, down, right, or left may cause black or
gray areas to appear on the display screen. The level at which such
condition does not occur is based on the proper control range for the
camera.