Manual

9
CABLING INSTRUCTIONS*
1
Power
7
RS485
6
ALARM
2
AHD 1CH
3
AHD 2CH
4
AHD 3CH
5
AHD 4CH
Use the diagram below to connect the camera to external devices:
1. Power: connect the camera to a proper power supply.
2~4. AHD BNC Outputs 1~3: Connect each of the camera’s lenses as a separate output to a
DVR supporting AHD signal such as the VMAX AHD CORE
TM
and VMAX A1
TM
. On the DVR
side, each lens will be set as a different channel.
5. AHD Output 4: Connect all 3 of the camera’s lenses as a single output to a DVR
supporting AHD signal such as the VMAX AHD CORE
TM
and VMAX A1
TM
. On the DVR side,
the camera’s full panoramic view will appear on a single channel.
6. Alarm:
7. RS485: Connect the camera to a
controller or the DVR using RS485.
1# DOUT + ORANGE
1# DOUT - RED
2# DOUT + YELLOW
2# DOUT - BLUE
3# DOUT + GREEN
3# DOUT - GRAY