Manual

28
4
th
BNC OUTPUT PANORAMIC OSD MENU*
STITCH Use this menu to adjust the stitching between each of the cameras as needed.
You can adjust each individual camera’s position by selecting the camera name and
move the image up, down, left and right to align with the camera next to it.
Once the individual cameras’ position is properly adjusted, select FIX and exit the
STITCH menu to save the stitching changes. It is not recommedned to manually
adjust the camera’s stitching. The camera’s stitching is pre-set in the factory settings.
EXIT When all setup is complete, press the EXIT to save all changes and exit the menu.
Stitching adjustment on CAM1 Stitching adjustment on CAM2
Stitching adjustment on CAM3 FIX Changes