Manual
27
4
th
BNC OUTPUT PANORAMIC OSD MENU*
MOTION When enabled, the camera will focus into the sensor’s display where motion is detected.
This feature is available only in the 4th BNC output, when the camera’s image is
displayed as a 180
o
view as a single camera output. The focused area will be
shown in the top screen above the panoramic camera view.
This motion alarm is not related to the individual channel motion setup. To enable,
change the value to ON.
PATROL When enabled, a white frame will appear in the panoramic image, moving from left to right.
The frame’s view will be displayed in the top screen above the panoramic camera view.
This feature is available only in the 4th BNC output, when the camera’s image is
displayed as a 180
o
view as a single camera output.
If MOTION and PATROL are both enabled, the camera will zoom into a motion area and track
motion across the camera’s view. Once no motion is detected after ten (10) seconds, the camera
will return to PATROL mode.