User's Manual

Plastic anchor (3x)

Ceiling mount (1x)

Locking nut (1x)

Tapping screw 6x35 (3x)

Safety wire (1x)

Machine screw M5x6 (1x)

Pipe socket PF 1.5 inch (1x)

Set screw (3x)

Set screw (2x)

Socket (1x)

Adapter PT 1.5 inch (1x)

Set screw (1x)

Start point

Set point

Twist

(Long indicator)

(Short indicator)

INSTALLING THE MOUNTING ACCESSORY

Rev Date: 01/20

Speciﬁcations and pricing are subject to change without notice.

Quick Start Guide

1. Using the wall mount, mark and drill the mounting holes on the surface using the ceiling mount ﬂange.

2. Pull wires through to connect to the PTZ camera from the ceiling.

3. Using the plastic anchors and screws*, mount and secure the mounting bracket to the mounting surface.

4.7” (120m

4.4” (112mm)

3x 0.25” (6.5mm)

5.07” (129m

15.75”

(400mm)

4. Open the access plate and pull out

cables through the rectangular

access hole.

5. Attach the 1.5-inch adapter to the

ceiling mount bracket and ﬁx it

using the set screw.

6. Attach the camera’s safety wire

to the ceiling mount bracket and

organize cables.

7. Close the access plate of the ceiling

mount bracket.

8. Push in and turn the camera

clockwise into the adapter. Fix it

using the set screw of the adapter.