Manual

WEBVIEWER*
Setup > Network > RTSP Settings
Use this setup menu to configure the camera’s RTSP Connection
information. The camera must be connected to a server using the RTSP URL
in order for these settings to apply.
1. RTSP Session Time Out – Check the box to enable RTSP time out for each of the camera’s
streams. When enabled, the RTSP connection will time out if a client become non-responsive after
the set dwell time. Set the dwell time from 30~120 seconds.
2. RTSP Setup – The RTSP’s default port is 554. if needed, adjust the port.
3. All RTSP connections to the camera will be listed in the table at the bottom of the screen.
30