Instruction manual

D i s p l a y S c r e e n > S e t u p > E v e nt > E m e r g e n cy A l a r m

Send alarm triggered information to predefined destination (i.e. remote client software).

1. Site Information: Site Name, Transmission Settings, and Video Duration for the video that will be sent when

motion is detected.

2. Emergency Alarm Recipient List: Enter the IP address and the Port for the remote site(s) to which you want to

send the video. You can set-up up to five different servers. You must set same port to get EA data.

3. Event for EA: Select which type of event will trigger the alarm – Motion or Sensor.

4. Select Apply to save changes.

WEBVIEWER*