User Manual

15
6.2.4 Video Mask
Go to ImageÆVideo Mask interface as shown below. You can set 4 mask areas at most.
To set up video mask:
1. Enable video mask.
2. Click “Draw Area” button and then drag the mouse to draw the video mask area.
3. Click “Save” button to save the settings.
4. Return to the live to see the following picture.
Clear the video mask:
Go to video mask interface and then click “Clear” button to delete the current video mask
area.
6.2.5 ROI Configuration
Go to ImageÆROI Config interface as shown below.