User Manual

2.2 Cabling the camera
Follow the table and diagram below to connect your camera to all external devices.
No.
Connector
Wire Color
Description
1
Power jack Black
Camera power
(12vdc)
2
RJ-45 Black Ethernet
3
RCA jack Black Audio input
4
RCA jack Gray Audio output
5
5-pin cable
Yellow Alarm input 1
White Alarm input 2
Violet Alarm input 3
Brown Alarm input 4
Gray GND
6
2-pin cable
Red Alarm output
Black GND
The
camera must be installed by qualified service personnel following all local and federal
electrical and building codes.
•
Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the camera. Generally, a
crossover cable is used for direct connection to PC, while a direct cable is used for
connection to a hub.
•
Connecting alarms A1, A2, A3, A4 (alarm input 1, 2, 3, 4)
8