User Manual

View Angle
•
View Angle Setting:
o
Tilt angle limit:
This option is designed to limit the view angle as there is some
obstruction in zooming out on specific areas of the tilt angle.
o
Flip:

Off:
The dome camera moves until 90° vertically.

Auto:
When the camera reaches the floor directly above the moving
object, it will stop. At that time, release instantly and pull it down again
to run the auto-flip function. When you use the panning range, it is
recommended to use the flip mode to Auto.
o
Enable pan angle range setup:
When the dome camera is installed near a wall,
the pan angle range can be limited by the user.

Right limit:
Select the right limit of the pan angle range.

Left limit:
Select the left limit of the pan angle range.
Click ‘S
ave’ to save the settings, or click ‘Reset’ to clear all the changes.
56