User Manual

Pattern

‘Patt

ern’ is a series of pan, tilt, and zoom movements programmed by an administrator or

operator. Up to 8 patterns may be programmed for the dome camera.

Follow steps below to program the Patterns:

1. Click the

Set

button of desired Pattern number of Pattern Setting list, and move pan,

tilt, and zoom using the Control box. The movement history is automatically recorded.

2. Click the

Done

button after you completed the camera movement program.

3. Repeat steps 1 through 2 for each desired Pattern number.

4. If you are not satisfied with the programed pattern, click the

button to clear the

pattern.

5. You can edit the title of each pattern number for easier recognition.

NOTE 1:

Each Pattern can store up to 500 seconds of movements.

NOTE 2:

The percentage total of 8 Patterns cannot exceed 100.