User Manual

3.6.5 Dome Configuration
Preset
If
you need to view specific places routinely, you should program Presets. A Preset is a
programmed video scene with automatic pan, tilt, zoom, and focus settings. Once
programmed, clicking the Preset number or clicking the Go button in the PTZ Control Panel
calls up that Preset automatically.
•
Preset Setting:
o
Preset number:
The Preset number can be selected in the range 1 ~ 256.
o
Title:
Up to 12 characters (Alphanumeric characters and space)
o
Focus:

Auto:
Auto Focus is always active.

Manual:
Auto Focus is inactive.
o
Preset Setup:
Activate the PTZ Control Panel.
o
Preset Delete:
Delete selected Preset number.
Follow
steps below to store the Preset positions:
1. Click the
Preset
Setup
button, then shows the PTZ Control Panel.
2. Choose the desired Preset number from the Preset drop-down list:
3. After aiming the camera (view direction and lens control) by using the
Arrow
and
Zoom
butt
on in PTZ Control Panel, click the
Save
button.
4. Repeat steps 2 through 3 for each additional Preset position.
Click ‘Save’ to save the settings, or click ‘Reset’ to clear all the changes.
51