User Manual

o
CIFS:
A file format for a NAS device.
o
NFS:
A file format for a NAS device.
NOTE 1:
Common Internet File System (CIFS) is a remote file access protocol that forms
the basis for Windows file sharing, network printing, and various other network
services. CIFS requires a large number of request/response transactions and its
performance degrades significantly over high-latency WAN links such as the
Internet.
NOTE 2:
Network File System (NFS) is a network file system protocol, allowing a user on a
client computer to access files over a network like how local storage is accessed.
NFS, like many other protocols, builds on the Open Network Computing Remote
Procedure Call (ONC RPC) system.
The CIFS screen displays as below.
o
Address
: Enter the IP address for the NAS device.
o
Remote
Directory
: Enter the directory or folder location to be recorded in the
NAS device.
o
Capacity
: Enter the capacity of storage to be used. This must be less than the
total storage capacity.
o
ID/Password
: Enter ID and Password. The camera will ask for these whenever
you access the NAS device.
o
Check
: Press the Check button to check the validity of Device Setting data.
•
Format:
Click the Format button to format the SD card.
•
Device Remove:
Click the Device Remove button before detaching the SD card for data
safety in the SD card.
•
Device Information:
Show current SD card information.
Click ‘S
ave’ to save the settings, or click ‘Reset’ to clear all the changes.
45