User Manual

▽ Record
When the camera detects an event, it can record the video stream onto the SD memory (not
supplied) or NAS (Network Attached Device) as a storage device. Check the “Enable Record”
box to enable the service.
•
Record-Setting:
o
Overwrite:
Click the checkbox to overwrite the storage device; Continuous
Record is available when not using an SD card.
o
Stream Type:
You can select Stream 1, Stream 2, Stream 3, or Stream 4.
•
Stream 1, 3, 4:
H.264 data
NOTE:
Stream 2: MJPEG data cannot be recorded.
o
Pre-event:
Enter pre-event time value for the storage device pre-recording.
o
Post-event:
Enter post-event time value for the storage device pre-recording.
o
Audio Record:
Check the box if you want to record audio with video.
•
Record Schedule:
You can set the weekly recording schedule for each day. Drag or click
area by a box unit at first. Clicking the block toggles the recording between on and off.
Click the All Select button to set a schedule for the entire week or a whole day,
respectively.
•
Device Setting:
Select the device type to be recorded in the drop-down list. The screen
changes according to selection.
o
SD:
Mounted SD card.
44