User Manual

Event Out
▽ SMTP(E-Mail)
The camera can be configured to send event and error email messages via SMTP (Simple Mail
Transfer Protocol).
•
SMTP (E-Mail) Setting:
Select “Enable” to activate the SMTP operation.
o
Sender:
Enter an email address to be used as the sender for all messages sent
by the camera.
o
Interval:
Represents the time interval of the email notification when events
occur several times.
o
Aggregate events:
Shows the maximum number of emails sent within each
interval.
o
Use Mail Server:
Check the box if you are using a mail server to receive event
notification and image email.
•
Mail Server:
Enter the hostnames (or IP addresses) for your mail server.
•
Port:
Enter the port number for your mail server. Enable the sending of notifications
and image email messages from the camera to predefined addresses via SMTP.
•
Connection security:
Select a connection security type in the drop-down list:
o
None / StartTLS / SSL
•
User name/Password:
Enter the User name and Password as provided by your
network administrator or ISP (Internet Service Provider).
•
Login method:
Choose a log-in method in the drop-down list:
o
AUTH LOGIN / AUTH PLAIN
•
SMTP (E-Mail) Receiver:
User can assign up to 8 receivers.
o
Receiver #:
Enter an email address.
40