User Manual

o
Dwell time:
Determines how long the triggered event holds from the last
triggering.
o
Show Histogram:
This camera provides a live histogram for easy setup of the
threshold level in the motion window. The pop-up window shows activity
strength and threshold level, and the user can determine the threshold level for
triggering motion events by slide bar or type in a number.
o Users c
an select any box by clicking the name on the preview window or click
on the list. Users can delete selected zone via right mouse click selection for a
selected box, or click any one of the X buttons in the zone list.
Click ‘Save’ to save the settings, or click ‘Reset’ to clear all the changes.
▽ Network Loss
This is used to trigger an event every time the network connection is failed. Select “Enable
network loss” to activate the Network Loss event. Select a dwell time for how long the event
will last from the point of detection.
Click ‘Save’ to save the settings, or click ‘Reset’ to clear all the changes.
38