User Manual

• Fixed IR Bright: Specify the brightness of the Fixed IR illuminator. (1 ~ 5)

• Moving IR Bright: Specify the brightness of the Moving IR illuminator. (1 ~ 5)

• Delay: The time duration for both of the lighting conditions can be customized to let

the IR illuminators divert between activation and deactivation. (1 ~ 60)

• Fixed IR Level: Fixed IR illuminator automatically turns off at a specified level in zoom-

in operation. This specifies the Fixed IR illuminator off level. (1 ~ 12)

• Moving IR Level: Moving IR illuminator automatically turns off at a specified level in

zoom-out operation. This specifies the Moving IR illuminator off level. (1 ~ 9)

• Moving IR Mode: This decides the moving IR illuminator size in the image. If the size is

small, the illumination is focused and bright in the center, but the edge area becomes

dark.

NOTE 1:

On level, Off level, and Delay are activated at Sensor Mode only.

NOTE 2:

Users can either use slide bar or type in the number for items in any controls.

Click ‘S

ave’ to save the settings, or click ‘Reset’ to clear all the changes.